1 / 4
Nitehawk 36 Sherpa Micro toolboard mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Toolboard mount for Nitehawk 36 and Sherpa Micro extruder
- Rating
- 4 / 5
- Likes
- 7
- Downloads
- 54
- Makes
- 1
- Views
- 814
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a toolboard mount for my Voron 0 to address some limitations I found in the Universal Mount for the NH36 toolboard when using the Sherpa Micro extruder. Some advantages compared to the universal mount:
- Does not interfere with the Voron 0.2 X carriage.
- Centered to the toolhead
- Umbilical guide has full movement
The flexible umbilical guide is heavily inspired by the universal mount; similarly, its hinge is a piece of filament that you melt at the edges.
Materials used:
- 9 x Voron heat set insert (M3 x 5 x 4 mm)
- 2 x M3 x 5 mm screws
- 3 x M3 x 8 mm screws
- 1 x M3 x 22 mm screw
- 1 x M3 x 22 mm screw
- 1 x M3 x 25 mm screw