508 models
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
Update 2: Optimized design in CAD + Improved some structural rigidity. (23-06-2024) Thank you Annex Engineering for creating a very fine extruder in the beginning. Check them out: Sherpa Heavy All standard from the Sherpa Heavy…
对于同一电机，2mm轴的成本为59元，而5mm轴仅成本为8元，简直不可理喻。我在互联网上找不到修改后的版本，看来我只能自己做一个了。 For the same motor, the 2mm shaft costs 59 yuan, and the 5mm shaft only costs 8 yuan. It is unreasonable. I can't find a modified version on the Internet. It seems that I…
This is a mount for the BTT EBB42 toolboard for Eva 3.x with Orbiter 2.x extruder. Two versions available: one with a mounting option for piano wire inside umbilical cord, one with mounting option for the outside. Piano wire can be…
I am too lazy to enter what you need as screws but you only need m3 type and a couple nuts. Some holes are self threaded without nuts, you can figure it out if you inspect f3d file. Also bltouch mount is a bit high from nozzle you need…
Verified and tested, it works fine now What is this? Reverse Integrated Drive Gear Assembly Sherpa Mini with mellow helical gears This helical gears was for Vz-HextrudORT CNC version Why not use bondtech BMG Reverse Set? because i can't…
A remix of JB3D's design that eliminates 3 parts, exchanges a single 5mm('ish, you can use anything from a pen to a 7mm diameter) spring for the two springs of the previous design, and uses a standard exacto #11 blade instead of a 9.2mm…
.ased on the official Voron 0.2 Bowden Toolhead stl. Now updated for 0.2r1 Needs 2 brass heat set inserts, the back screw needs to be replaced with a 20mm length one.
Sherpa mini with the zero and ecas mods combined into one also modified the tensioner arm to work with a heatset insert.
Direct drive sherpa extruder conversion prusa mini for printing TPU filament dual drive super light weight about 117grams Printing 0.4nozzle TPU85A 50mm/s @0.23layer with ease Installation Instruction:…
This is a low profile mount for the Ender 3 and the Sherpa Mini Extruder. The mount has a special cut-out for the original BL-Touch mount. You can print it upper2bottom or back2front (with supports) - most strongest is back2front. Also…
This replaces the housing core part of the Annex Engineering's Sherpa Mini Release 2 extruder to accept an ECAS coupling for the reverse Bowden feed. Has non-round geometry to allow printability and minimal force to push-in. Other designs…
Following the print settings specified in the Sherpa Mini github , print the main body, idler arm, and front cover. Also print the stock rear housing from the Sherpa Mini github . Remove the modeled-in support from the switch recess in…
Adds sherpa mini support to the EVA3 ecosystem. You can use the standard front however assembly will be easier with the modified front included. The only difference is a small cutout to allow assembling the front bolt easier. This is an…
This is a Sherpa Mini Mount for the Voron 0.1 3D Printer. The Sherpa Mini being quite a close fit to the stock Mini Afterburner makes this a very practical alternative for the Voron.0.1 with the added bonus of less clogging, easier…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) Hello 3D Printing friends. The idea for a filamentcutter arose after i installed an ERCF on my Voron 2.4. But none of the existing could…
This is just a model for the carrier plate component of the MK4 X-Carriage . This Model needs brass inserts which can be inserted into slots with a diameter of 4.6mm. The Model also has Attachement holes for an adxl345.
This is a remix of Jrlomas ' Sherpa Crew Mini. You can read about it on the original model's page. My changes are listed in the appropriate section. Why is this a thing? → Added performance, as in more grip (sherpa's limiting factor) and…
This model adapts the V0.2 Umbilical PCB holder to be compatible with the DragonBurner toolhead and the Sherpa Mini as the extruder. You need 4 standard M3 heat set inserts for the spacers. The original spacer are not long enough and have…
This models allows you to mount a PC4‑M10 PTFE coupler above your Sherpa Mini (which is a bit loose normally) which fixes the bowden tube in place above your extruder. The PC4‑M10 coupler must be M10x1 threaded to match the threads in the…
(Files belong to their respective and linked owners.) Please email/contact me for immediate changes such as incorrect credit or placement, etc. I take no credit for any of these designs except for the extremely basic remix of some of the…
For this build you will need (refer to photos): 6x heatset insets (M3x5x4) 2x M3x16mm for X Carriage 2x M3x8mm 2x M3x18mm (can eventually be used 20mm, but with 1mm washer on top) 2x M3x12mm 4x M2.5x8mm 8x M2 6/8mm 8x M2 nut around 15mm…
Bonjour, Edit : ajout porte lame V2 (Meilleur mouvement, ajout d'une courbe sur le levier coulissant permettant de réduire le mouvement lors de la coupe) Fichier Zip Réalisation de la V2 du filament Cutter pour Sherpa Mini (Compatible…
The original mount relied on a machined effector plate to fit an original e3d hot end, but this resulted in a 4 mm gap between the housing and radiator, when used with stock radiator. Also, I removed the nut pocket for the radiator. It…
You would need to print: Shepa Mini Extruder adapter - only one part and swap from the original (5x M3x5x4 inserts needed for the whole mod) 4 lane adapter with runout sensor (I've printed one from transparent PET) Important information:…
here is the WristWatch BMG extruder but with Sherpa Holes mostly everything's unchanged the original repo: https://github.com/bythorsthunder/Voron_Mods/tree/main/Wristwatch_Extruder_BMG
Had an OEM IDGA gearset laying around and I had nothing else to do with it. Clockwork2 seemed to be unecessarily complex so I opted to butcher WristWatch2 BMG version to make it fit IDGA as it's already fairly similar. Just needed to move…
Want to take your voron 0 to the next level? with the modular mounting system of the after sherpa and the increased cooling capacity of the mini stealth, you get just that. on top of the benefits of the increased part cooling with dual…
Multiple people (including me) stated that they needed more clearance for the shaft bearing, or that they had added washers as spacers to get it to fit. This fixes that issue. I also removed the need for supports. Without my modification,…
Adds sherpa micro support to the EVA3 ecosystem. You can use the standard front however assembly will be easier with the modified front included. The only difference is a small cutout to allow assembling the front bolt easier. Fasteners…
Edit : ajout de la version Xol (Non testé pour le moment) Edit 2 : ajout du fichier Step, je suis en train de tenter une version avec levier mais pour le moment je suis limité dans mes compétences en modélisation Filament Cutter pour…
Used in a Voron 0.2 setup with: Dragon Burner BTT EBB36 CAN board - **warning**: not compatible with max31865 for now! Sherpa Micro extruder BOM: 2x 25mm aluminum standoff 4x M3 x 6 mm BHCS 2x M3 x 10 mm BHCS 2x M3 x 4 x 5 mm heat insert…
This is a filament cutter to LGX Lite and Sherpa Mini extruders. I have been using it on Dragon Burner. However you can use it on any hotened mount that can have an extruder mounted to the top of it. If you are using the LGX Lite mount…
If you like my parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) Please take a look at the newest version of this cutter This is an evolution of my Dragonburner-filamentcutter. This Model is not fully…
WARNING: With 10mm high fan, Y must not go under 4mm, front screws that hold the fan will hit enclosure door. I wanted a more maintenance friendly voron 0.1 print head with sherpa mini extruder, also to be as light as possible, so I've…
UPDATE: Version 2 uses the same holes that mount the EBB36 to interface with the extruder mounted standoffs and moves the bottom holes approximately 16mm downward to create more clearance for hotend wires from the terminal block. The…
A Simple Sherpa Mini Directdrive Remix of the Satsana for the Ender 3 V2. Additional parts you need for this remix: 2x M3 Brassinserts (I used Ruthex) 2x M3 x 12mm Screws Sherpa Mini The BLTouch Mount you can find in the Remix Satsana…
As my V-minion is now using Sherpa Mini so I remix this for EVA3.0. Similar to EVA2.4, the two M3 bolt at bottom of Sherpa will also be used to fix on the mount. Note! The model is not printed and tested A Lighter version is updated.
This is a spin on Annex Engineering's Sherpa Mini extruder, just with integrated collet holder. Uses 4mm UM2 collet : UM2 Collet - Aliexpress **Note : The Step file if directly sliced may throw non-manifold edges warnings, just repair…
Couldn't find quick release plate compatible with my Velbon Sherpa 250 so I have designed my own. QB-157.stl - first version - cavity for screw head is about 5mm. QB-157 deep.stl - cavity is deeper for bigger hardware. Print instructions…
Modified the 4 lane Pico MMU Hubs to use ECAS04. I wanted a easier way to disconnect the PTFE tubes because I'm constantly changing things on my printer. This also prevents the PTFE tubes from popping out. I've also optimized the filament…
Direct Drive Bracket for Ender 3 V2 (Compatible with Sherpa Mini, HGX Extruder, LGX Extruder, ProtoXtruder, and BL Touch) Description: Upgrade your Ender 3 V2 with this versatile direct drive bracket. Compatible with Sherpa Mini, HGX…
***************** *** ITALIANO *** ***************** Non è più un problema stampare il TPU con la Super Racer! Ho progettato un nuovo case per trasformare l'Effector da Bowden a DirectDrive e, per l'occasione, ho pensato di installare uno…
Sherpa or TBGS extruder Direct drive conversion for Prusa mini V2 Dedicated to those who can't stand the prusamini bowden system, or those who want to print flexible filament. Compared with the previous version, this version lowers the…
Since I was struggling getting reliably good filament tips with some filament, I decided to make my own design. First I tried The Printing Shark's design, but I did not like how the spring worked, or how the blade was mounted. The general…
V3.1 Is now released - New features; 2mm thicker top mount - 0 visible flexion now @ recommended print settings Added some parts to increase rigidity, moved cable tie hole Tidied up design -------------------- DISCLAIMERS: Print on TOP…
I was always kind of upset with how heavy the stock MK3S+ and Bear toolheads were, so I decided to modify a friend's Orbiter mount to work with the amazing Annex Engineering Sherpa Mini extruder (link to github below). Prints have been…
This is a mod of the Mini-AfterSherpa to mount 2 4010 fans. To get it to fit onto the x carriage some plastic needs to be removed around the side and bottom of their insets on the x carriage. The fan ducts some filing and superglued in…
The new EBB36 Gen 2 has a different type of CANBUS connector. I wanted a new bracket to hold the plug stable on the EBB36. I found a suitable design by @1word4WORDS_2139936 for the WWG extruder. This remix tidies up the design to suit a…
I needed an ECAS Sherpa Mini and stumbled across diedirk's great model with the Zero mod built in. Needing a filament sensor as well, I modified the front housing and the lever arm to accommodate an external microswitch. Use a brass…
just a sherpa extra heavy with micro mounting hole locations
As I finished up the build of my Voron 0.1 I of course printed the Mini Afterburner. I found the assembly to be difficult and the entire time I had visions of taking it completely apart for any maintenance. After doing some research I…
Filament Cutter for Praying Mantis Printhead Fits to Sherpa Mini, Hextrudort, HGX lite and Orbiter Extruders as well BOM knife no.4: https://a.aliexpress.com/_EJTAJfR M2,5 nut M2,5 x 5 screw M3 nut M3 x 15 screw Sping frim ballpoint pen
The positions of the holes on the floor are the same as those of the sherpa. The gear I have is a crappy clone, on aliexpress a long time ago. Dimensions may differ from the genuine product. Precautions when printing are the same as…
I wanted a filament sensor for my Sherpa Mini, but I did not want to print a new body, so I designed this one. Back is optional I made 2, one to use a 3pin JST-XH connector, the other just a hole to pass through the wires. BOM: 1 - 4mm…
Voron Mini Stealthburner mit Sherpa Mini Extruder
BTT EBB 36 Mount for Sherpa Mini to mount on the opposite side of the motor. This was originally designed for The Diamond Mount but could be used on any hotend mount. Includes top plate for diamond mount to route cables to the back of the…
An adaptation for the sherpa micro to be able to use it with MMUs. Being a fixed distance extruder, the distance between the center of the dual gears is set to 8.6mm. It is compatible with RIDGA. If you have a set of clone gears, the…
Sherpa Heavy or Extra Heavy Extruder Cable Management Strain Relief I recently installed the Sherpa “Extra” Heavy extruder on my CoreXY Converted RigidBot Printer, but I needed a way to keep the cables nice and tidy and reduce strain on…
I couldn't find an EBB36 mount for a PUG strain relief that was compatible with the Sherpa Mini Extruder, so I designed this one. BOM Item Qty M3x5x4 Heat Set Insert 2 M3x8 SHCS or BHCS 2
original design： https://github.com/Annex-Engineering/Sherpa_Mini-Extruder 2022\11\16 V2 Version It works well now and can print on Delta very fast I don’t know how to call this telescopic lanyard, it’s very cheap, it can lift the…
A chopped-up and slapped-together remix of @Esoterical_306854's excellent remix of @therick's mount. Requires 2 3x4x5mm heatset inserts. Print in the default orientation using standard Voron print settings.
No print support! https://www.phaetus.com/en-us/products/dxc-extruder The motor is not included as it's meant to be a drop in replacement for the Creality K1 extruder. Needs to be 12t gear (the common motor for Sherpa and Orbiter uses…
Update 10.11.2022: Now the fan has two fixing spots and also its a bit better positioned. Also the airflow of the heatbreak fan is optimized. Hi, i builded my own adapter for a sherpa extruder with an phaetus hotend because i could not…
The model works with a bowden setup as well as an Orbiter v2. Sherpa design is untested, but should work. Will update when confirmation of it working. Additional hardware (screws and such): 8 - M3 heat set inserts 2 - M4 heat set inserts…
This is my remix of miniaftersherpa which should fit Trianglelabs CHC PRO perfectly, should also be alright for V6 Volcano.
Just a simple model made from scratch, Includes 2x 18mm Stand offs Includes 1.5mm ‘nubbins’ to prevent shorting. Requires - 6x Brass inserts (including standoffs) or 2 if using without. - 2x M3x6 Countersunk/FHCS Screws - 2x M3x6 BH/SHCS…
A toolhead mount based around therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Clockwork 2 extruder. The original PUG download page (for the gland itself) is at…
As i needed a mount for my Nitehawk-36 and didnt find a version to fit my requirements, i remodeled the mount from the Xol Toolhead assembly to fit to my toolhead Update 15/04/2025: - edited the standoffs for better clearance on the board…
Update October 27, 2022 The latest version is now included in the main Icarus 2 package (zip file on top of the page): https://www.printables.com/model/130789-icarus-2-qidi-x-max-x-plus-i-mate-x-maker-carriage Update July 5, 2022 The…
This is a spin on SIVIS's sherpa iteration for Mellow RIDGA, just with integrated collet holder. Uses Mellow RIDGA : Mellow RIDGA - Aliexpress Uses 4mm UM2 collet : UM2 Collet - Aliexpress Additional Details can be found at SIVIS's…
You will need: 2x 20mm M3 Spacer The model has build in support
Sherpa mini mount to fit the original Ender 3. 2021-12-09: Uploaded new STLs (v3), in the version from Nov 8th I mirrored the model upside down to minimise supports when I should have rotated it 180 degrees. 2021-11-08: Supports added to…
Originallly I was using the MiniSB Sherpa Mini mod by @PvtPrivate_458827 that can be found linked in the original models tab. I wanted to keep utilizing the extruder with the added benefits of the Mini Stealthburner's r1 revision changes.…
I designed this model for my printer. I tested a lot of versions and deleted all weakness. My final version is ready to go just paint correctly supports. After print, put inserts and then assembly whole thing. You will need: some M3…
Direct drive for Flsun Super racer with Orbiter V2/ Mini Sherpa extruder and Bambu hotend Also LGX lite extruder compatible Use Original fans Use M3 nut brass (3mm lenght) inserts for Orbiter/Sherpa, Bambu and effector fix to housing For…
Tested on mantis 5015 (Voron 2.4 300), I think it will work for other toolheads, for example Archetype. Magneto Filament Cutter fo VZbot https://github.com/Treintjes/Magneto_Filament_Cutter Mellow Store…
This is a compact custom filament sensor version of the legendary Sherpa Mini that includes several improvements. Please read the differences section compared to the original Sherpa Mini. This version uses nylon screws and nylon nuts at…
Italiano: Video di installazione Download Istruzioni assemblaggio Sherpa Mini Istruzioni per pausa ad altezza su Cura Slicer ITA Istruzioni per pausa ad altezza su Prusa Slicer ITA Sistema per modifica Direct Drive per Flying Bear Ghost 5…
This is a lightweight Sherpa Mini extruder mount/holder/bracket for Ender 3. Compatible with Creality CrTouch. It is small and light. This is my own desing and I printed it from ASA filament. You may use any filament that resist high…
Just a remix to STL's because the Stock 3mf files did not work for me
First of all - credits go out to the original creators: [GitHub] Mini-AfterSherpa: A Modular Voron V0.1 Style Toolhead [GitHub] Sailfin-Extruder: A lightweight compact extruder Update: I copied now the original “SAILFIN” letters to the…
BOM: - 6x m3 heat inserts - 6x m3 10mm BHCS - 3x JST XH2.54 2 pins - 2x longer screws for motor to attach to standoffs (i think m3 x 16 should do it, just a guess) - about 3 zipties (if they even will fit rofl) Instructions: the stand…
Praying Mantis is a complete Printhead for the following configuration: Sherpa Mini Extruder V6 Volcano Hotend 40mm Hotend Fan 5010 Part Cooling Fan BLtouch Sensor I did this Remix because the original Mantis was a much to complicated…
Eva 2.4 mgn9 Top Sherpa micro
Update: LH made a new version of the hub so i updated it. Use Hub Top and Hub Bottom instead of Pico Hub if you want the new version. Old version is still fine so if you have it just use that. If you want to use guest lane feature where…
Did you know that Annex Engineering made a wonderful and lightweight extruder you can print at home? https://github.com/Annex-Engineering The Sherpa Mini and Sherpa Micro is the lightest extruder. You can mount it with the Ender3 and…
This a mount for the latest dragonburner to mount a tz-v6 hotend but with a standard v6 nozzle. The v6 nozzle causes the hotend to be 1.8mm longer so I just adjusted the dragon mount to allow for this change in length.
This is a filament cutter remixed to place the cutter arm in the rear left instead of front left. I am using this on my Voron 2.4 with Monolith AWD with Archetype blackbird toolhead. Placing the arm in the rear eliminates the build area…
This mod is very specific for Voron 0.1 if you need better hotend cooling and you are using an Orbiter Extruder... Because there is no much extra space in the mini AB, Dragon hotends are not compatible with this mod. I decided to use a…
Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…
QUICK UPDATE - I measured the original X-axis endstop mount, and it is much shallower than the one I am running, but I believe it may be too shallow to clear the linear rail and trigger on the carriage. I shaved down the one I am using by…
Eva 2.4 mgn9 Top Sherpa mini
to build this, you'll need: 2 50mm m3 screws 4 m3 15mm screws 2 m3 nuts 4 m3 heat inserts 3010 axial fan (24V)
I had and old bmg extruder and wanted a updated the extruder for my modified ender 3 max but it was using a different pom gear that had that extra plastic lip so modify the model to fit that.
A modified Filament Cutter Holder providing needed spacing between the Crossbow Filament Cutter mounted and a Sherpa Mini (printed or CNC) to fully actuate the filament cutter and avoid interference between the cutter and the body of the…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
this is a top plate to accomodate hgx or sherpa mini extruder patern, extruder hole designed to work with M3 insert
