Sherpa Mini Filament Sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament Sensor for Sherpa Mini without having to print a new body.
- Rating
- 3.5 / 5
- Likes
- 31
- Downloads
- 209
- Makes
- 1
- Views
- 1,951
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I wanted a filament sensor for my Sherpa Mini, but I did not want to print a new body, so I designed this one.
Back is optional I made 2, one to use a 3pin JST-XH connector, the other just a hole to pass through the wires.
BOM:
1 - 4mm ball bearing
1 - D2F switch without lever
1 - PTFE Collet
1 - 15mm PTFE to put between the sensor and the Sherpa
2 - M2 8mm self tapping screws if you want the back. (I just cut some 12mm I had)
Changes:
Made the attachment points thicker.
Switch mechanism inspired by: https://www.printables.com/model/442650-eva-3-toolhead-filament-sensor-mechanical-and-reli