Filament Cutter for LGX Lite and Sherpa Mini
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a filament cutter to LGX Lite and Sherpa Mini extruders. I have been using it on Dragon Burner.
- Rating
- 5 / 5
- Likes
- 100
- Downloads
- 321
- Makes
- 0
- Views
- 3,534
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
This is a filament cutter to LGX Lite and Sherpa Mini extruders. I have been using it on Dragon Burner. However you can use it on any hotened mount that can have an extruder mounted to the top of it.
If you are using the LGX Lite mount with the Dragon Burner you must use the Sherpa_Mini_Extruder_Mount.stl to mount the LGX Lite Cutter to the Dragon Burner.
https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner
You need to super glue the #11, Exacto Knife Blade into the Blade_Holder_Bottom.stl
For the LGX Lite you need: 2 x m3x8 to bolt the LGX_Lite_Cutter_Top.stl to the extruder. 2 x m3x40 to bolt the assembly to the Dragon Burner
For the Sherpa Mini you need: 2 x m3x40 to bolt the assembly to the Dragon Burner
Credits go to these 2 guys for starting this project. I took it and cleaned it up and made it work for the LGX Lite as well. I also fixed the cutter hitting the sherpa mini extruder.
Check out the start of this here: https://www.printables.com/model/599936-filament-cutter-sherpa-mini-ercf-v2 https://www.printables.com/model/622289-filament-cutter-for-sherpa-and-sherpa-patterned-ex