1 / 4
Filament Cutter for LGX Lite and Sherpa Mini — zdjęcie 1
1 / 4

Filament Cutter for LGX Lite and Sherpa Mini

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a filament cutter to LGX Lite and Sherpa Mini extruders. I have been using it on Dragon Burner.

Ocena
5 / 5
Polubienia
100
Pobrania
321
Wydruki
0
Wyświetlenia
3534
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v2.0

This is a filament cutter to LGX Lite and Sherpa Mini extruders. I have been using it on Dragon Burner. However you can use it on any hotened mount that can have an extruder mounted to the top of it.

If you are using the LGX Lite mount with the Dragon Burner you must use the Sherpa_Mini_Extruder_Mount.stl to mount the LGX Lite Cutter to the Dragon Burner.

https://github.com/chirpy2605/voron/blob/main/general/Alternative_Voron_Mounts/Extended_Extruder_Mounts/Sherpa_Mini_Extruder_Mount.stl

https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner

You need to super glue the #11, Exacto Knife Blade into the Blade_Holder_Bottom.stl

For the LGX Lite you need: 2 x m3x8 to bolt the LGX_Lite_Cutter_Top.stl to the extruder. 2 x m3x40 to bolt the assembly to the Dragon Burner

For the Sherpa Mini you need: 2 x m3x40 to bolt the assembly to the Dragon Burner

Credits go to these 2 guys for starting this project. I took it and cleaned it up and made it work for the LGX Lite as well. I also fixed the cutter hitting the sherpa mini extruder.

Check out the start of this here: https://www.printables.com/model/599936-filament-cutter-sherpa-mini-ercf-v2 https://www.printables.com/model/622289-filament-cutter-for-sherpa-and-sherpa-patterned-ex

Tagi