84 models
Filametrix Mod This is a mod of the Voron Stealthburner which adds a filament cutting possibility! Main Body Main Body with Filamentsensor Option has been added. - SB_CW2_Main_Body_Cutting_with_2xD2F_ECAS -…
Galileo2 (G2E) with filament runout sensor. - ECAS-Fitting compatible. - Step file included. - No change in overall G2E dimensions BOM: 1x Omron D2F microswitch 1x 5mm steel ball bearing (optional) 2x M2x8 self tapping screws (You might…
I found all the things I wanted in my Stealthburner to work with my ERCF and combined them to complete this. I have remixed all these parts to work with this setup. None of the original printed parts for the Stealthburner can be used. You…
V1.1 - UPDATE: As @Hornet331_645553 noticed and mentioned, there was a slight misalignment with the lower sensor. I have implemented a fix for it as well as added slightly more clearance for the upper D2F switch, hopefully making it…
This is a remix of Ibot_3D's excellent Voron Stealthburner printhead for the Bambu hotend. Changes include adding support for Filametrix, moving the wire path out of the way of the filament cutter, and tightening the slot for the hotend's…
Revision 1: 2025-11-15 Revise Amazon links per currently available items Reflect Happy Hare's incorporation of Filamentrix's Filament Cutter into its code base Introduction The Voron 2.4R2 with Happy Hare provides a means to cut off the…
Following the print settings specified in the Sherpa Mini github , print the main body, idler arm, and front cover. Also print the stock rear housing from the Sherpa Mini github . Remove the modeled-in support from the switch recess in…
CW2 Main body for use with the BTT EBB SB2209/RP2040 canbus toolhead board. Dual filament sensors for use with the ERCF. Updated 9/23/25 New and improved EBB fan housing, way more room and improved air flow. Fixed the tight limit switch…
Changed to be compatible with TZ V6 2.0 HotEnd
1-26-There is a new main body and a new cutting arm (to replace the cutting arm from filametrix). The standard cutter arm doesn't allow for enough movement to cut the filament with the larger guidler. This uses the latest model from the…
ADDED: STEP Files Ive made an mount / modification for the filamentrix mod for the slice engineering hotend. iff there are any issues let me know. Didn't tested it yet. Github Filametrix mod: https://github.com/sorted01/Filametrix Here…
use a 6x3 magnet for the filament sensor with a standard microswitch refer to the filametrix mod for fitting the heat insert. https://github.com/sorted01/Filametrix/tree/main
added a 6x3 magnet to the cutting arm. it helps push it back
I had to do some modifications to some existing models to build my Stealthburner with Filametrix filament cutter, Filament runout sensor, LGX lite and Bigtreetech SB2209 / RB2040 CAN Board. Thank you to the work of…
Improved filametrix cutter.
My update filament sensor before and after the extruder for ERCF Rabbit Feeder with filametrix cutting mod from the GitHub user sorted01 https://github.com/sorted01/Filametrix 2x sensor D2F-5 2x ball 5,5mm 4x tapping screw M2x10
Changed the wiring path to a backside U slot
redesigned sturdy version of depressor mount
Combined the Voron Dragonfly BMO Stealthburner printhead with files from the Filametrix project. Tested/working on my Voron 2.4R2.
Main body update with reinforced latch from - https://github.com/VoronDesign/Voron-Stealthburner/tree/main/STLs/Clockwork2/Direct_Drive !! NOT PRINTED AND TESTED !! - I created at the request of another member. For assembly: 2x sensor…
I needed the stealthburner to fit volcano size nozzle and filametrix.
Modifikace dílu Voron Galileo 2 Extruder - front_body_ECAS_coupler Runout sensor -5mm ocelová kulička a mikrospínač, mechanické provedení nemá problém s průhlednosti vlákna. v2 - přepracováno, přidáno zúžení pro lepší vedení filamentu. v3…
I have tested so everything fits and cuts properly and still can interact with the arm screw used by the leaver but not tested yet with the machine doing the cutting. Added a new body with “press fitted” inserts. I noticed after printing…
In the original model the lower switch recess was slightly to shallow, the switch was standing out.
This is a filametrix printhead for the Dragon Ace hotend from Trianglelabs. It uses KrisV's Voron Stealthburner Dragon ACE mixed with the SB-Dragon filametrix printhead. Print following the Filametrix manual, this is only the Printhead,…
I cut 2 half of model from Original filament cutter and v6 volcano mods
Here Are you seeing , an Gantry Servo Depressor for the Filametrix or the FilamAtrix. This Servo Depressor works with the normal Filametrix or FilamAtrix (CW2 and G2E) Material are needed: 1 x M3 Heatnut 1 x M3 4x3x5 Heatinsert (short…
The ERF Filametrix toolhead mod for the ERCF MMU calls for a specially sized #4 hobby knife blade. Since the blades are made of hardened steel, this seems like a very difficult thing to cut. However, since the metal is quite brittle and…
Many thanks to @Prze87mo_296900 for his version of the depressor mount. I adjusted the model to fit the “more robust belt path”-mod for the original Switchwire. I also added a breakaway support structure so you don't have to use print…
I wanted to have G2E with the ERCF Twin Sensor support, but without the Filametrix cutter. I'm planning to use the EREC in place of the Filametrix. Currently not tested or printed yet. Length of the PTFE Tube on page 47 of the G2E Manual…
build is exactly same as cw2. Knomi V1 untouchable is tested and is working fine, it should also be compatible with knomi v2 but it is not yet tested.
This is the Galileo 2 Filametrix extruder for ERCF or Trad Rack. I couldnt find a entry sensor only for happyhare. So i remixed the g2e to what I needed. Been working great on my 2.4 350 build. I use revo voron so i have included those…
This depressor arm for The filametrix filament cutter mounts to the stock Ender 3 x-axis end-stop cover. Allows the uses of the Filametrix on an Ender 3. X-Endstop must be repositioned to be a positive stop. (right side) Required Items:…
Shortened the top to allow the extruder door to open properly. You will need to adjust the cut position to match the divot in the arm since it is shorter. This is a remix from the original arm. credit @sorted - (Filametrix "don't get…
I could not find a cable door for Filametrix Stealthburner CW2 with ECAS, so i modified the Cable door from BTT
Two arm variants: One compatible with Stealthburner with Galileo2 and Filametrix arm Second is “universal” with three positions (not tested) BOM M3x30 screw - 2 pcs M3x12 flat screw - 3 pcs M2.5X16 screw - 2 pcs servo MG90S Hot Nut M3x4x5…
I put the cat ears on the ERF_Filament_Cutter cw2 with toolhead and entry sensors.
I'm currently working on my Voron Trident build, I wanted to take the opportunity and design something of my own for it. I decided to make a customized version of the LGX-Lite tool head that includes the Filametrix filament cutter and an…
Remix of K1-UHF mount for Filametrix
Filametrix Front and Back hotend mount for the TZ v2 hotend Based on the dragon mount, the TZ hotend has a shorter heatsink, so the bottom part that goes around the heatsink was moved up. The bulk of the work was done by user spyder6346…
I created this modification to have the pc board integral with the head and avoid unhooking the flat cable in case of maintenance. The cable that goes to the motherboard or pcb toolboard passes under the slot in the CW2 cover without…
I couldn't find a compatible one, and the normal G2 dual sensor one was unreliable, D2HW are just better in every account. This is a bond of 2 designs, certainly not my hard work: https://github.com/Ntrondle/Galileo2_D2HW for the sensor…
This is a Dragon HF mount, for use with Filametrix Filament cutter.
Modified to work with 6.3mm balls i got from an old bike bearing. The original description also says that it's not compatible with original hotend mounts, but that's what I'm using and it works so idk.
added hall effect sensor, for after extruder. pretty much mashed GrimmCustomCues with 7lle should work.
It's a remix that's support filametrix cutter mod on stealthburner with vz Goliath Air hotend. Works with the other remix: https://www.printables.com/model/834969-stealthburner-goliath-cpap-knomi Thank's
I liked hartk's strain relief mount for the reaper and wanted to splice it together with this umbilical mount for the StealthBurner G2E. I ran into an issue using the Filametrix version due to it not have a mounting hole for one of the…
THIS IS A BETA MODEL!! I designed the Servo Mount footprint to match the stationary mount of Filametrix, However, this design choice requires attaching the mount to the extrusion before installing the servo, as there isn't enough…
Modified Steathburner with Filametrix Suits 4020 Cooling Fan For Creality Spider v3 Hotend Top lock added to stop top latch from opening Hotend and extruder sensors Hotend holder modified to utilise M2 heat insert, (Honed out to suit…
added a hole on the depressor for a 6x3 magnet and a hole for a m4 grub screw on the cutter arm to assist with returning arm to normal position after cutting filament as sometimes the spring is not enough to return the arm.
I modified the cw2 model to fit 6mm balls that press on the filament sensors. It works very well .
I have not tried this yet aside from on the bench!! Not a lot of room to add an entry sensor, so this is what I came up with. It's a bit ugly, but I can hear the switch clicking when filament is inserted. I will try it out in the coming…
This remix cuts out material to provide enough clearance to use both the PCB mount and the cutter arm on the same unit. Because the top hole on the PCB mount isn't complete, make sure not to overtighten. I also recommend using an m3…
a parametric mod on the Filametrix for mosquito
I used the CAD file from the repository to adapt the TZ 2.0 V6 for Filametrix
Requires x3 M3x40 screws, x1 M3x6, x1 M3 heat set insert. The best blades I have found, they have lasted thousands of cuts so far:…
I decided to try and add a FilamAtrix/Filamterix filament cutter to the Stealthburner MK8 variant. I included two versions: “SB C-MK8 TH Rear CW2_FilamAtrix.stl” and “SB C-MK8 TH Front_FilamAtrix.stl” for straight PTFE tube “SB C-MK8 TH…
I wanted to use an old hall sensor with filametrix and the ERCF but couldn't find one
Adapter for installing QIDI Q2 Hotend to Voron Stealthburner toolhead. Hotend supports 40 mm^3/s and has unicorn nozzle Important: Q2 hotend contains K-type termocouper by default, you should use some converter (MAX31855, etc) or replace…
You have to pause the print at layer 49, insert the klicky switch (that has the wires already attached) and the 6x3 magnet and then resume. The mini PTFE tube from the top of the extruder to the entry sensor needs to be (out of my head)…
for the wiper i use a small piece of silicone that i cut from a silicone workstation mat Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)
This model allows you to mount the cutter depressor on a very good servo model (Axon Micro+). The CAD is a complete redesign of this file to fit nicely around the Axon servo, as it is a bit different than standard MG90/SG90. Officlal…
If, like me, you use an Orbiter extruder with your Stealthburner, this is a must! Great initial design by Pete, and I'm sure it would have worked if I were using the long lever, but I need something that would work with my setup.
An endstop for the stock voron switchwire (as opposed to the enderwire like the linked model) with the galileo2 extruder.
G2E For Filametrix, without any sensors.
Filametrix depressor and poop chute for modified neptune 3 pro. I used a MGN9H, 320mm rail for extra length. Need 2 X M3 heat insert and 2 X M3x6 if you use the poop chute. 1 X MG996R servo and hardware. Need 1 D2F-01L switch to replace…
as the tittle said, its using common 6mm plastic collet and cheap m3 heat insert nut with arround 3.7OD
You will need 2x 40mm M3 socket head screws for sturdy mounting (button head might also work) A 20mm M3 socket head screw is also needed to mount the arm. The arm can be found here , the original design
You'll need to make some changes yourself (probably) This configuration deviates from “stock” in a few ways. I am posting the STEP files here so that it may save someone else some modeling time…. but for now I can't be bothered to mod for…
Remix of https://github.com/sneakytreesnake/StealthOrbiter
Modified Phaetus Dragon High Flow mount for Stealthburner v2.2 with Filametrix Mod . update on 8/5/2026 add FilamATrix Mod
Meowburner, the Puurrfect Stealthburner
This is a currently untested mod to change out the 5.5mm ball bearings in the dual toolhead sensors. I am currently in the testing phase and waiting for my MR52ZZ bearings to come in. Anyone else that would like to test this, use at your…
longer than original, work with 5 magnet 6x3mm
Using this as a belay extruder to feed my G2E/SB. My filament path to the filament rack is 3+ meters so reliable extrusion was an issue. This solved that. I also wanted a filament runout sensor at my entry point. BOM Omron D2F-L3-D3…
A STEP assembly has been made of the Filametrix system. This aims is easier assembly and less friction. 1 - thread on an M5 nut onto a PTFE tube. 2 - cut it off clean 3 - with a 2mm drill, just turning it by hand open up the squished tube…
I hacked this together... I know its not great I did put an m3 heatsert in after I bolted it together. don't ask me the ptfe length I just figured it out... I just installed it and it is working... so yay.... I was hoping someone with…
This is the same model as the original, however I needed to make it work for a filament cutter. This honestly should be redesigned from scratch, but I was in a hurry, so I just did it the ghetto way. I honestly don't even want to post…
Designed for an SV06 Plus to use with the Filamatrix filament cutting system Note: you will need 35 mm screws to replace the two upper X-axis motor screws I printed the motor plate bracket flat, but stood the cutting arm depressor on the…
Modified Phaetus Dragon High Flow mount for Stealthburner v2.2 with Filametrix Mod . update on 8/5/2026 add FilamATrix Mod
This is a currently untested mod to change out the 5.5mm ball bearings in the dual toolhead sensors. I am currently in the testing phase and waiting for my MR52ZZ bearings to come in. Anyone else that would like to test this, use at your…
![Galileo 2 (G2E) Filament runout sensor (UPDATED) [Filametrix and ERCF compatible]](https://media.printables.com/media/prints/643093/images/5077730_2e554cb6-2575-420e-bb02-eb9297ec54fb_2b773503-77b1-47cf-bd2d-d7ff2e546f65/pxl_20231110_184825771.jpg)
