Fullsize LGX SB mount with cut out for filametrix cutter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified the original design with cutouts to accommodate the cutter.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
This is the same model as the original, however I needed to make it work for a filament cutter. This honestly should be redesigned from scratch, but I was in a hurry, so I just did it the ghetto way. I honestly don't even want to post this because it's embarrassing, lol.
It took two iterations of removing material while also still keeping enough there to not end up with too thin of areas to print / be structural still, but it does work and will give you a full range of motion with the cutting arm.
If your cutting arm is rubbing against the mount, try just making the screw on that side snug instead of super tight. I had similar problems at first as well, but once I just left it at snug, it now moves back and forth nice and smooth how it's supposed to.
I'm not sure what size screw it ended up being to mount up the SB face on that side, you will have to play with it, and see what works for you.
Also, if I recall, the scalpel blade had to be a mm or two longer as well for there to be a full coverage of the filament path while cutting.
Nothing needs to change anywhere else though, as the hole at the bottom of the mount in the filament path works as is to drop a heat set into. However, there's going to be a gap between the start of the path / the heat set that I personally filled with capricorn tubing to make sure the filament stayed straight and didn't have any obstructions. Drill the heat set threads out like the filametrix guide suggests.
The rest works with the lower ho tend mounts on the filametrix GitHub as is.
Sorry for the lack of info here as I was in a hurry to get this to work as I said earlier, I didn't design this model from the ground up I just downloaded it, and wanted to get this cutter together real quick.
Also, the cover on that side needs to be left off as well. The cutter won't work if the cover is on.
If I ever take the time to fully remix this by completely redoing it, I will leave a link under this comment.
