1 / 6
Voron 0 (0.1/0.2) Toolhead for Sherpa Mini and Dragon SF/HF
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extremely light (12g printed parts with heatset inserts), with plenty of cooling from 2x 4010 fans.
- Rating
- 5 / 5
- Likes
- 114
- Downloads
- 428
- Makes
- 0
- Views
- 4,598
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
For this build you will need (refer to photos):
- 6x heatset insets (M3x5x4)
- 2x M3x16mm for X Carriage
- 2x M3x8mm
- 2x M3x18mm (can eventually be used 20mm, but with 1mm washer on top)
- 2x M3x12mm
- 4x M2.5x8mm
- 8x M2 6/8mm
- 8x M2 nut
- around 15mm of PTFE going between hotend and extruder
- 2x 4010 fan
- 1x 3010 fan
You can reinforce both part fans by installing 31mm 2/4 PTFE rebar behind your hotend, using 2xM10 self-tapping screws (see last photo to see how it is mounted in front).
Keep in mind that this toolhead is about 3mm wider on each side than original Mini SB, in place where (sensorless on V02 at least) homing occures.