1 / 2
Parametric Sherpa Heavy or Extra Heavy Extruder Cable Management Strain Relief — image 1
1 / 2

Parametric Sherpa Heavy or Extra Heavy Extruder Cable Management Strain Relief

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Keeps cables nice on the Sherpa Heavy or Extra Heavy extruder.

Rating
5 / 5
Likes
38
Downloads
184
Makes
1
Views
866
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

Sherpa Heavy or Extra Heavy Extruder Cable Management Strain Relief

 

I recently installed the Sherpa “Extra” Heavy extruder on my CoreXY Converted RigidBot Printer, but I needed a way to keep the cables nice and tidy and reduce strain on the cables.

This model accomplishes both of those things. It is held to the stepper motor with one or two M3 screws, and uses two zip ties to keep the wires attached.

I also made a modification to the rear housing if you are having the same shaft bearing clearance issue that I did.

Parameters:

If you need to, there is only one parameter to edit. Just input the height of your stepper motor.

Printing:

This model can be printed in its current orientation with no supports.

Add a brim to aid in bed adhesion, and even if printing with ABS, turn the fan on for overhangs and bridges (otherwise the top gets droopy).

Tags