Parametric Sherpa Heavy or Extra Heavy Extruder Cable Management Strain Relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps cables nice on the Sherpa Heavy or Extra Heavy extruder.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 184
- Wydruki
- 1
- Wyświetlenia
- 866
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Sherpa Heavy or Extra Heavy Extruder Cable Management Strain Relief
I recently installed the Sherpa “Extra” Heavy extruder on my CoreXY Converted RigidBot Printer, but I needed a way to keep the cables nice and tidy and reduce strain on the cables.
This model accomplishes both of those things. It is held to the stepper motor with one or two M3 screws, and uses two zip ties to keep the wires attached.
I also made a modification to the rear housing if you are having the same shaft bearing clearance issue that I did.
Parameters:
If you need to, there is only one parameter to edit. Just input the height of your stepper motor.
Printing:
This model can be printed in its current orientation with no supports.
Add a brim to aid in bed adhesion, and even if printing with ABS, turn the fan on for overhangs and bridges (otherwise the top gets droopy).