Toolboard Mount for Fyestc H36 on A4T with WWBMG
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach your H36 to your WWBMG very close to the X beam Note: Specifically for use with Vitalii3D's "XOL/A4T Mount".
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 0
- Views
- 252
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Note: Specifically for use with Vitalii3D's "XOL/A4T Mount"
I am in no way affiliated with him, I just used his mount
What it is:
When assembling my A4T I did not like any of the toolboard mounts I found available. They all mounted them too high for my taste or had you route the cable around and back down. Even when routing the cable around and putting the PUG on the side, the cable sticks up pretty far and I felt as if that didn't really solve the problem.
This design still doesn't quite solve the problem - you still lose some Z-height unless you take the top panel off, but it is functional and I like it.
I designed this myself in Fusion 360 by using the available CAD models for the A4T, H36, a NEMA14 motor, MGN12 rail/carriage, and a 2020 aluminum extrusion. Everything fits well on my printer, but your results could vary.
I uploaded the STEP file so you can edit things how you see fit. This works perfectly for me but if its not quite right and you want to change it, go nuts! I set the license to CC attribution - so please just link the original if you make a remix or anything.
What this design does:
Gets the toolboard mounted as close to the X beam as I could get it. This means the XT30 plug and PUG are as low down as they can be.
Uses the PUG standard.
Has the 3rd mount for extra stability.
BOM:
Printed PUG (parametric umbilical gland)
(I used a PUG_V4_S_6mm zip tie version in the pictures)
4x3mm heat inserts (2 for threads to mount the board, 2 for the PUG cap)
2xM3x6 SHCS (longer might be okay. BHCP would probably work too) used the mount it to the standoffs coming from the motor)
1xM3 washer (used for the left moving mount fastener)
2xM3x8 BHCS (for mounting the board. M3x10-12 would work. SHCS would work too)
2xM3x8 SHCS (for securing the PUG cap. Longer will not work. Could use BHCS.)
1xM3x12 SHCS (for the 3rd bottom mount to the carriage)
Could be simplified massively depending on what you have around - for instance you could get away with either 6xM3x8 BHCS or SHCS. Just depends on how you want it to look and what you have.
Print settings:
I recommend using ASA-GF to print this. But regular ASA/ABS may work. The infusion of GF or CF makes the part stiffer, but brittle.
I used 5 walls, 5 top, 5 bottom, 40% gyroid infill, and a 0.2mm layer height with a 0.4mm nozzle.
Beyond that - whatever you printed your A4T parts with.
Assembly:
Put the heat inserts in. Attach the mount to the motor standoffs that are provided by Vitalii in the carriage kit. Put the A4T onto the carriage - per the instructions for the A4T that 3rd lower mount fastener should already be in the carriage. You'll need to put the included printed spacer (in orange below) on that fastener - which should be the M3x12 in the BOM. Leave it loose until you get everything into place and then tighten that M3x12 down. Then you can attach the board and connect everything up. Insert the XT30 when its time to and use a printed PUG in the top mount and secure it down.
Insert 2 of the heat inserts here

Insert 2 of the heat inserts here

Motor standoff mounts in blue, board mounts in green, and printed spacer in orange
