P
PrintablesLayerMaker
Cartographer V4 Xol/A4T Carriage Probe Module Mount
New nozzle to probe Y offset is now 21.65mm instead of 22mm.
- Downloads
- 402
- Likes
- 65
- Rating
- 5
Search results: a4t
Counting matching models…
P
PrintablesB A
Bigtreetech BTT EBB36 GEN2 Orbiter v2 A4T toolhead mount
EBB36 GEN2 Mount for A4T Toolhead with Orbiter v2 / v2.5 Mount for installing a Bigtreetech BTT EBB36 GEN2 toolhead board on an A4T toolhead using an Orbiter v2 / v2.5 extruder. This is a remix of the original A4T THB mount from Armchair…
- Downloads
- 392
- Likes
- 44
- Rating
- 5
P
PrintablesCreativeRaja
Monolith Carriage for XOL/A4T
An (experimental) A4T/XOL carriage for Monolith Gantry SCALE THE CLIPS IN Z ( in the slicer ) TO GET THE CORRECT CLIP FITMENT Information to find ideal height is found on the main Trinity Read.me , under “assembly” Uses the “universal…
- Downloads
- 367
- Likes
- 59
- Rating
- 0
P
PrintablesB A
WWBMG Bigtreetech BTT EBB36 GEN2 A4T toolhead mount
UPDATE: Cable relief geometry fix in v5, cable is more centered now. Some other minor geometry fixes. Mount for installing a Bigtreetech BTT EBB36 GEN2 toolhead board on an A4T toolhead using a WWBMG extruder . This is a remix of the…
- Downloads
- 329
- Likes
- 49
- Rating
- 4.5
P
Printables3D smart Prints
A4T-AFC Faces
All A4T-AFC toolheads have been updated with added face components, aligning their design with the A4T standard. Please, if you like, share your toolhead!
- Downloads
- 315
- Likes
- 31
- Rating
- 5
P
Printablesmadmaxx890
A4T Cartographer CNC Carriage Cutting Jig
I wanted to use the Cartographer probe & CNC carriage with the A4T toolhead which requires removing ~1.8mm from the bottom of the mount. UPDATE: After some testing, it seems like removing the 1.8mm doesn't raise the probe high enough to…
- Downloads
- 310
- Likes
- 78
- Rating
- 5
P
PrintablesVitalii3D
Vitalii3D XOL/A4T Mount Printable Parts
Please print from ABS or any other high temp material using official recommended Voron settings. A4T/XOL Mount
- Downloads
- 229
- Likes
- 19
- Rating
- 0
P
PrintablesL10n
XOL / A4T BTT Eddy Duo mount
XOL / A4T Mount for the Bigtreetech Eddie Duo: CAN / USB Switch accessible: No need to remove the Eddy from the mount to flash it via USB a little wider (the original mount was narrower than a press fit) Printed in Anycubic ASA with Voron…
- Downloads
- 178
- Likes
- 20
- Rating
- 0
P
PrintablesJager
Head A4T for Sovol SV08 on carriage cartographer cnc (without trimming)
To maintain the original position of the nozzle and ensure installation on the cartographer cnc carriage without cutting, the mount was changed with an offset of 2.4 mm along the Z-axis and 7.8 mm along the Y-axis. The Bambulab hotend…
- Downloads
- 142
- Likes
- 49
- Rating
- 5
P
PrintablesIoannis Giannakas
Voron A4T toolhead Blobifier shaker arm
Voron A4T toolhead Blobifier shaker arm A modified version of the shaker arm and shaker to fit the A4T toolhead. Variations Against the Stealth Burner Shaker Design Redesigned the shaker to match the A4 toolhead geometry One M3x8 SHCS…
- Downloads
- 135
- Likes
- 35
- Rating
- 0
P
PrintablesАлександр Исаев
A4Tech Bloody B820R Wired Keyboard Foot
The first layer is 0.15 The remaining layers are 0.08 Width 0.4 3 perimeters Filling in 100%
- Downloads
- 131
- Likes
- 6
- Rating
- 0
P
PrintablesSubNebula
A4T WWG2 EBB36 Gen2 Toolhead Board Mount
Edited the existing WWG2 mount to support the EBB36 Gen2. Added clearance under the top of the board and slightly increased the standoff height.
- Downloads
- 108
- Likes
- 9
- Rating
- 0
P
PrintablesPanchodelis
Voron Trident Horizontal Umbilical Chain for A4T with Galileo2 and Orbiter – RTO Edition V2.1
https://www.youtube.com/watch?v=ime0QRmLQDA This mod was designed and optimized specifically for the following configuration: Toolhead: A4T Carriage: XOL Extruders: Galileo 2 (WWG2) A beta version of the mount for Orbiter extruders is…
- Downloads
- 103
- Likes
- 32
- Rating
- 0
P
PrintablesNeptunus0001
LDO Nitehawk-36 (NH36) Toolboard Orbiter v2 A4T toolhead mount
LDO Nitehawk-36 (NH36) Toolboard Orbiter v2 A4T toolhead mount Mount for installing a LDO Nitehawk-36 (NH36) toolhead board on an A4T toolhead using an Orbiter v2 / v2.5 extruder. Including bottom mounting slot for Xol-carriage.…
- Downloads
- 84
- Likes
- 8
- Rating
- 4
P
Printablesmak77
A4Tech PK-910H Webcam Cover
Not much to say, webcam cover for A4Tech PK-910H or any other tube-style camera with 28.5 mm diameter. Easy to print, no supports needed. Use piece of standard 1.75 mm filament as a hinge rod.
- Downloads
- 78
- Likes
- 7
- Rating
- 0
P
Printablescouperd
A4T Sherpa Mini SB2209 Mount
Wanted to avoid purchasing a new tool head control board but wanted better performance than what was available form orm Stock Stealthburner. Mount has been test fit with an A4T tool head on a XOL carriage, but should also work without…
- Downloads
- 70
- Likes
- 11
- Rating
- 0
P
PrintablesSnigz
H36 Toolhead board for WWG2/A4T (PUG)
A simple H36 board to be used with the PUG system on a WWG2 extruder. Compatible with A4T. Will require : 4x M3 heat insert (voron specs) 4x M3 screws (8 or 6 mm should work). 1x M3x35 for the extra mounting point on the WWG2 body itself…
- Downloads
- 70
- Likes
- 15
- Rating
- 1
P
PrintablesScott Jackson
A4T-AFC Cutter Arm Base for Titanium Backers
I recently switched to the A4T tool head with AFC and had to remove my backers to install the cutting bar base. I immediately saw my bed mesh get worse, so I designed this to allow me to run both. I'm probably going to make another model…
- Downloads
- 69
- Likes
- 24
- Rating
- 5
P
PrintablesGoldenSoul
SV08 XOL/A4T Toolhead X Gantry
SV08 XOL/A4T Toolhead X Gantry Remix to allow for full X travel and proper Parallel Belt Alignment for XOL/A4T. Untested with A4T but Based off CAD file it should line up perfectly. Before the remix the belt pulleys were -1.5mm making the…
- Downloads
- 65
- Likes
- 20
- Rating
- 5
P
PrintablesSalvatore Crobu
A4T for SV08 Microswiss, stock hotend, CHCB hotend, Orbiter, Sherpa Mini
Still in testing Compatble with stock SV08 hotend, Microswiss hotend for SV08 and SV08 CHCB Require additional 2x M3x20mm compared to A4T BOM for mounting the hotend Paint supports for the hotend mounting area Print with the same settings…
- Downloads
- 65
- Likes
- 26
- Rating
- 5
P
Printables3Diocrity
3010 to 4010 Blower Fan Adapter - Dragonburner, A4T, ZeroFilter, etc.
3010 to 4010 Blower Fan Adapter My V0.2 kit came with 3010 blower fans for the Mini Stealthburner toolhead, but I built mine with a Dragonburner so I had no need for the 3010 fans. This little box allows you to use those 3010 fans in…
- Downloads
- 62
- Likes
- 12
- Rating
- 5
P
PrintablesStar-Gun
A4T/XOL WWG2 SH36 PUG
H36 - WWG2 mount for XOL/A4T Carriage and PUG I've used the A4T (XOL carriage) THB Mount for the WWG2 and combined a FYSETC H36 V1.3 with PUG rev. 1 - 29.10.2025 ------------------------------------------------ If anything is off or…
- Downloads
- 60
- Likes
- 16
- Rating
- 0
P
PrintablesBurRDA
A4Tech Bloody G575/P Headband attachment
Print with 4 perimeters Material: PETG Supports: Yes
- Downloads
- 58
- Likes
- 3
- Rating
- 5
P
PrintablesRoed
Beacon/Carto spacers for Vitalii3D XOL/A4T mount
When you use the Vitalii3D XOL/A4T Mount for Voron Printers it's possible that your Beacon/Carto is hitting the hotend. In my case it was the Trianglelab Dragon Ace Volcano where Beacon hits the sock/heater block. The hotend is also in…
- Downloads
- 58
- Likes
- 7
- Rating
- 5
P
PrintablesHitLuca
A4T THB mount for WWBMG and TAP carriage
Very simple change, took the original toolhead board mount and removed the bottom screw point to allow clearing the tap carriage pcb. Also lowered the motor mounting holes to raise the toolhead pcb by 5mm. Works with A4T and WWBMG…
- Downloads
- 57
- Likes
- 9
- Rating
- 0
P
Printablesjetcat
Hextrudort BTT EBB36 GEN2 A4T toolhead mount
Models for CNC Hextrudort Low and Plus.
- Downloads
- 53
- Likes
- 10
- Rating
- 0
P
PrintablesSilicon Fossil
STEALTHCHANGER A4T MAGNETIC DOCK
Dock was modified to work with the full length dock version I am using on my StealthChanger build. Big shout out to Dudewithan02 for the original mod of the dock using the short version and to the team at DraftShift Design Check the…
- Downloads
- 52
- Likes
- 12
- Rating
- 0
P
PrintablesApollo1298
A4T Cowling Variations for BDpressure (Dragon, Dragon UHF, Rapido UHF, TZ V6 2.0)
the BD Pressure sensor is a strain guage that sits between the hotend and the hotend mount. This allows the sensor to measure extruder pressure. By measuring this you can automatically calibrate PA live. The sensor requires 6mm of…
- Downloads
- 52
- Likes
- 15
- Rating
- 0
P
Printablesporek965
A4tech keyboard leg replacement
Did your support broke on your keyboard? Then i have the files for YOU to 3D Print.
- Downloads
- 51
- Likes
- 3
- Rating
- 0
P
PrintablesJASON SWAN
A4T EBB36 Mount for WWBMG with PG7
I needed more robust strain relief for the umbilical on my Mercury One.1 printer. My EBB MCU kept losing comms with Klipper due to cable flexing and the connector shifting on the board. I initially tried a PUG, but it broke so I created…
- Downloads
- 49
- Likes
- 9
- Rating
- 0
P
Printablesfrauhottelmann
Fysetc H36 Backplate for A4T / Wristwatch G2 (with and without PUG)
I needed a backplate to mount the Fysetc H36 Combo v2 to my Wristwatch G2 on my A4T. Ziptie Version This version only has a strain relief with zipties. You need two heatset inserts for mounting the H36 to the backplate and two zipties.…
- Downloads
- 49
- Likes
- 6
- Rating
- 0
P
PrintablesRolohaun Design
SimpleCore Redux A4T Bambu Labs Cowl with beacon probe
Complete CAD for A4T Bambu Labs toolhead and beacon probe mount
- Downloads
- 48
- Likes
- 13
- Rating
- 0
P
PrintableswildBill
XOL Cartographer Mount for A4T with TZ V6 Hotend
XOL Cartographer Mount for A4T with TZ V6 Hotend Reorient for better printing direction with auto-orient, requires two heat set M3 inserts.
- Downloads
- 45
- Likes
- 6
- Rating
- 5
P
Printablesminilogique
A4T "big block" mod for big-motored 4010 blowers for Bambu Lab hotend
I had loads of above Aliexpress-average quality Creality's original 4010 blower fans that I decided to fit to A4T toolhead, however it was designed for smaller hubbed versions. I decided to give it a go and just delete some of the…
- Downloads
- 42
- Likes
- 14
- Rating
- 0
P
Printablesmr.jacock
Compact A4T cowlings for orbiter, rapido 2 UHF, Siboor CNC carriage
Planetary gear extruder have some COM problem, so i tried to fix the problems by lowering the motor and supporting it, so i have much less vibration and more accurate readings from the accelerometer. perhaps also compatible with other…
- Downloads
- 42
- Likes
- 6
- Rating
- 0
P
Printablesstrt_fnst
Endstop bumper CNC Parts with Xol/A4T
Hello! While upgrading my V2.4 i ran into a problem with my X Endstop. It would not get triggered when mounted on the toolhead mount. This happens in the combination with the CNC Xol/A4T mount with CNC Live idler XY joints from Vitalii3D.…
- Downloads
- 40
- Likes
- 9
- Rating
- 0
P
PrintablesDragonSlayer_SE
Eddy Coil mount for A4T toolhead on SimpleCore
my short ruthex m3 incerts just dropped in the original holes.. no heating required... (and i geuss it could be hard to get an iron in down there.. i used ordinary length ruthex M3 incerts on the "new poles" in the bottom plate i also…
- Downloads
- 39
- Likes
- 5
- Rating
- 0
P
PrintablesCông Dương
A4T Stealthchanger – TZ V6 2.0 Complete Toolhead Assembly (STEP)
A4T Stealthchanger for TZ V6 2.0 Complete CAD assembly of an A4T toolhead configured for a Voron 2.4 with Stealthchanger and a TZ V6 2.0 hotend. The assembly brings the toolhead, WWBMG extruder, backplate and dock together in one editable…
- Downloads
- 38
- Likes
- 5
- Rating
- 0
P
PrintablesLayerMaker
TV06 and A4T/Xol Compatibility Mod
Print in ABS/ASA with standard Voron settings. Either print the single or two-piece Y carriage version and 2x of the belt clips. If you are using the single Y carriage version, it is recommended that you print at a 45 degree angle for…
- Downloads
- 37
- Likes
- 13
- Rating
- 5
P
Printableshartk1213
A4T Crossbow arm depressor for Trident R2 front idlers
replacement front cover for trident R2 front idlers to double as depressor for the cutter...im using a4t + crossbow + xol cnc carraige for reference..if you use anything else it might not fit , CAD is available to make changes as needed.
- Downloads
- 37
- Likes
- 20
- Rating
- 5
P
PrintablesScott Jackson
A4T Shaker with cutout for V2.4 gantry screw
After adding Blobifier to my Voron 2.4 with an A4T toolhead, the screw on the bottom of the x/y gantry joint kept crashing into the shaker arm. Made some modifications to it to provide clearance. Orientation should load correctly, you'll…
- Downloads
- 36
- Likes
- 8
- Rating
- 0
P
Printablestjcarr70
A4T - Toolhead for the Sovol SV08. Utilising all the parts from the original toolhead including planetary gears, stepper motor, hotend, tension arm, induction probe and toolboard.
This is a set of models that repurpose the Sovol SV08 hotend (including microswiss), planetary gears, stepper motor and toolhead electronics. You will need extension cables for the original or microswiss hotend from Amazon. The original…
- Downloads
- 35
- Likes
- 16
- Rating
- 0
P
PrintablesАлександр Исаев
A4Tech Bloody Q100 Wired Keyboard Foot
The first layer is 0.15 The remaining layers are 0.08 Width 0.4 3 perimeters Filling in 100%
- Downloads
- 34
- Likes
- 2
- Rating
- 0
P
Printablesibuprofen
E3NG A4T Mount
This is a a4t mount for e3ng. a4t has been one of the most popular toolhead in the open source community, known for its high cooling capabilities, while also looking “stylish”. seeing how there isnt any mount in the e3ng, i decided to…
- Downloads
- 32
- Likes
- 11
- Rating
- 0
P
PrintablesButter Pockets
Toolboard Mount for Fyestc H36 on A4T with WWBMG
Note: Specifically for use with Vitalii3D's "XOL/A4T Mount" I am in no way affiliated with him, I just used his mount What it is: When assembling my A4T I did not like any of the toolboard mounts I found available. They all mounted them…
- Downloads
- 31
- Likes
- 7
- Rating
- 0
P
PrintablesAndybuilds
A4T Dragon UHF Carto Cnc mount
Modified the UHF mount to mount to the Cartographer Cnc mount without having to modify the Cnc mount
- Downloads
- 30
- Likes
- 3
- Rating
- 0
P
PrintablesAlex Vikingo
A4T mount for SOVOL ZERO Beta
made mount to fit A4T toolhead in Sovol zero, but its beta, no idea about canbus board.
- Downloads
- 26
- Likes
- 13
- Rating
- 0
P
PrintablesNeptunus0001
LDO Nitehawk-36 (NH36) Toolboard WW-BMG for A4T toolhead mount
LDO Nitehawk-36 (NH36) Toolboard WW-BMG for A4T toolhead mount Mount for installing a LDO Nitehawk-36 (NH36) toolhead board on an A4T toolhead using an WW-BMG extruder. Including bottom mounting slot for Xol-carriage.…
- Downloads
- 25
- Likes
- 3
- Rating
- 0
P
PrintablesG_Y-U_R-Z_A
Toolhead A4T Trianglelab CHC XL and Orbiter
This is a beta version of the Toolhead, which is fully functional and usable, but has some flaws. Namely: it may be difficult to install the cooling fans of the models and there are no special places for laying the wires. This model has…
- Downloads
- 22
- Likes
- 11
- Rating
- 0
P
PrintablesSourceOrDeath
Monolith Carriage for XOL/A4T 9mm belts repaired
Monolith Carriage for XOL/A4T using 9mm belts.
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesPanzerhalzen
A4T printhead with custom carriage
Hi! Here I share the assembly of a print head based on A4T with Cartographer and ProtoXtruder, but the parts, except for the feeder, have some differences from the original. The assembly uses a heavily upgraded carriage from Mantis. The…
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
PrintablesMike
Voron Trident Horizontal Umbilical Chain for A4T with WWBMG
This is a remix of Panchodelis his model to be able to use with the WW-BMG extruder for A4. Used A4T - THB Mount - WWBMG.stl as a reference for mounting holes
- Downloads
- 19
- Likes
- 7
- Rating
- 0
P
PrintablesMiroslav Klos
Keyboard A4Tech stand leg
Spare part for a keyboard A4Tech Bloody.
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesPsierra117
SV08 - A4T Filament Cutter ARM
Hey Guys, i am voronizing my Sovol SV08, for this i build the A4T Toolhead with the CNC Crossbow Filament Cutter. To Use this Cutter, there was no Model for a fitting Depresser Pin to actuate the Filament Cutter. So here we are, i made…
- Downloads
- 17
- Likes
- 6
- Rating
- 0
P
PrintablesEdwinL
A4T side-car PUG mount, toolhead board, xt30 angled plug and support strut
This model contains 3 mods to A4T you can pick and choose from 1. Sidecar PUG Mount for A4T+WWBMG I wanted to use PUG with my A4T on a Trident but I wanted something rigid and with minimum use of z-height about the toolhead. I created a…
- Downloads
- 16
- Likes
- 13
- Rating
- 0
P
PrintablesHitLuca
Stealthchanger A4T modular dock magnetic inserts
When testing my A4T toolheads on the stealthchanger modular docks I noticed they had a tendency to pivot back. I quickly found the common solution is to use this dock replacement which only adapts the short version and requires a reprint.…
- Downloads
- 16
- Likes
- 5
- Rating
- 0
P
PrintablesDicyroll Industries
A4T Cowling for Phaetus Rapido X, Xol Carriage and WWG2/Orbiter extruder spacing
Since I haven't found any official cowling for the A4T for the new Rapido X for Xol carriage and wwg2/orbiter spacing, I modified the already existing cowling for the Radido UHF. The screw pattern and hole depth on top has been changed to…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesPapaSchlumpf
A4T ToolChanger Dock "AntChanger"
The Stealthchanger Dock is a bit too complex for my needs and involves an excessive number of parts. I am looking for a simpler, more minimalist, yet reliable docking solution for my A4T ToolHeads. This is still very much a work in…
- Downloads
- 15
- Likes
- 6
- Rating
- 0
P
Printablesthomasfjen
A4T Switchwire Enderwire WWBMG
Modified Extruder Adapter and EBB36 mount
- Downloads
- 15
- Likes
- 13
- Rating
- 0
P
Printablesvswitch
A4T Enderwire Cartographer Mount
Modified for an Enderwire conversion. I had to shorten the mount by 2mm and add a notch for the Cartographer's USB/CAN connector. Modifications were required to fit the A4T toolhead.
- Downloads
- 15
- Likes
- 9
- Rating
- 0
P
PrintablesG_Y-U_R-Z_A
Toolhead A4T Trianglelab CHC XL and BTT Nebula
This is a beta version of the Toolhead, which is fully functional and usable, but has some flaws. Namely: it may be difficult to install the cooling fans of the models and there are no special places for laying the wires. This model has…
- Downloads
- 15
- Likes
- 5
- Rating
- 0
P
PrintablesYazan
A4T Rapido X cowling (Beta)
Rapido X was just released and with it i had to modify the cowling for A4T to be suited. its still in beta and its not an official mod by a4t team will be using it in the upcoming days and updated the page if needed
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
Printablesmr.jacock
Aux fan duct extender A4t - Rapido 2 UHF - Cartographer carriage - orbiter SIBOOR
In the title you cann read my config. Stock siboor aux are made for stock stealthburner, so i've modded the original for throwing aire in the right direction and not on the build plate. altready cutted for adding bed adesion
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesCancerix1700
A4Tech pk-980h webcam monitor mount
Original mount from my A4Tech pk-980h webcam broke, so I designed a replacement. Camera pitch is adjustable, assembly does not require screws. There is a version with and without a cable holder, but only the bottom part differs, so select…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
Printablesppet36
A4Tech numeric keypad CNC pendant keys
This model contains remapped keys for A4Tech external USB keyboard for use as a CNC pendant. I use kmonad to remap the keys to UGS shortcuts. With simple configuration: (defcfg input (device-file…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
Printableskostake
WWBMG ebb36 mount with PUG for A4T with cnc carriage
A remix based on several models, designed to add more mounting points to the carriage—thereby maximizing structural rigidity—and to include a slot for adjusting the motor tilt angle. I used M3x8mm standoffs and M3x12mm screws to mount the…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesGustavo Galbán
Toolhead A4T Kutter Filament with #11 blade Mod reinforced
El sistema me pareció bueno, pero en mi caso requería mejoras y refuerzos, ademas necesitaba de que el corte se accione desde el lado derecho, entonces espejé el diseño original y realicé breves cambios y agregué una tapa de sujeción para…
- Downloads
- 9
- Likes
- 3
- Rating
- 0
P
PrintablesHitLuca
A4T WWBMG IDGA extruder adapter for XOL carriage
3.8mm taller extruder adapter for the A4T toolhead and XOL carriage, to mount a WWBMG IDGA version
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesSalvatore Crobu
A4T for Mellow Heatcore4 UHF (No ALPS module)
A4T cowl for using Mellow Heacore 4 UHF (No ALPS module) + hotend fan duct Only for Ortbiter 2-2.5 and XOL carraige Use the same print settings as listed in the A4T GitHub Page Need to use the Orbiter 2.5 extruder adapter that is in the…
- Downloads
- 8
- Likes
- 8
- Rating
- 0
P
Printablesroboots21
Hex A4T Cowl Dragon/Rapido BD Pressure Mod (Sherpa Mini/XOL)
Modified Hex A4T Cowl (Dragon/Rapido Hot End, Sherpa Mini Spacing, XOL carriage) to fit the BD pressure gauge between the Dragon/Rapido hot end while maintaining the proper nozzle position near the cooling ducts. 3mm was removed and the…
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
PrintablesLaserBacon
X-Max 3 Endrborinn Toolhead - A4T Dragon + Sherpa Mini Assembly
X-Max 3 Endrborinn A4T Dragon UHF + Sherpa Mini Toolhead Endrborinn — “reborn / born anew.” Introducing the Völund Forge X-Max 3 Endrborinn , a redesigned QIDI X-Max 3 toolhead built around the A4T platform, Phaetus Dragon UHF, and Sherpa…
- Downloads
- 7
- Likes
- 7
- Rating
- 0
P
PrintablesSzymon Czekajewski
A4T Rapido V2 UHF cowling for Voron Tap compatible with crossbow and vz-hextrudort-low-plus
Put regular M3 heat inserts in the outer holes of the crossbow mount Assemble the whole cowling, leaving the 4010 fans out. Screw in the crossbow to the extruder with regular mount Screw in the crossbow to the cowling wiht 2x M3 18mm…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesRedAura
A4T Crossbow arm depressor for Sovol SV08
This model uses the threaded hole close to the belt tensioner. No supports required. A good combination with my WWBMG 4in1 hub design.
- Downloads
- 7
- Likes
- 6
- Rating
- 0
P
PrintablesBoerny
A4T Cowl - BDPressure - Dragon Ace
A4T cowl mod to work with BD-Pressure sensor and Dragon Ace hotend
- Downloads
- 5
- Likes
- 3
- Rating
- 0
P
PrintablesCông Dương
Cartographer V3 Mount for A4T Toolhead (StealthChanger Compatible)
Give your A4T Toolhead a clean, reliable home for the Cartographer V3. This mount is designed specifically for an A4T Toolhead fitted with a TZ-V6 2.0 hotend and fits naturally into StealthChanger setups. This reference configuration…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesBeardElk
MGN12H Carrier Belt Mount | XoL | StealthBurner | A4T
Prerequisites: You will need an MGN12H linear rail for the X axis and at least four 15 mm M2 screws before printing this. Print this in PETG-CF or stronger. PLA won't do. Remove the 2 screws from both sides of your carriage. DO NOT REMOVE…
- Downloads
- 5
- Likes
- 2
- Rating
- 0
P
PrintablesYurii
A4tech keyboard leg replacement (a4tech FKS10 FSTYLER)
The photo shows the first version, where the angle isn't ideal. Overall, it works fine for me, so I didn't reprint it. However, in the model uploaded here, this has already been fixed — the tilt angle is correct and it's ready to print as…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesEntharion
Sherpa mini toolhead board spacer/brace for A4T/SB2209 mount
Compatibilty and design choices I have used the a4t sb2209 toolhead board mount from the design I based this remake on, but this should fit any toolhead board mount on the Sherpa Mini designed for 20mm/16mm spacers, depending on the…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
Printablesbeb_run
WWBMG-A4T 2x sensor anti-squish mod
This mod lets you adjust the distance between the RIDGAV2 and the idler, just like CW2 does. Helps with flexibles and other filaments, also prevents the gears from destroying each other Required hardware (only for the mod) 1x FHCS m3x6,…
- Downloads
- 2
- Likes
- 2
- Rating
- 0
P
PrintablesRob Searing
ZeroG FMG A4T Crossbow Depressor 6mm & 9mm
Took ideas from other depressors but couldn't find a mount setup I liked. Ended up designing this and have been very happy with it. Explicitly designed for mounting on top of the FMG either 6mm or 9mm. I use ASA and a 10-20% infill with 2…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
PrintablesMauro Cordioli
A4T WWBMG Motor Plate for EBB36 Gen2 — Modular Umbilical Mount
his A4T WWBMG motor plate was designed around the new EBB36 Gen2 , with one simple goal: trying different umbilical mounting solutions without reprinting the whole plate every time. The secret behind this highly sophisticated “modular…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printablesfronti
WWBMG EBB36 mount with PUG for A4T Vitalii CNC carriage
This is a remix with an adjustment to the lower mounting point to fit https://vitalii3d.com/products/xol-a4t-mount-for-voron-printers You still need the pug front clip from the original model. For me a M3x20 SHCS screw worked well for the…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printablessupercrossed
A4T - Rapido X 4010 And 4015 Cooling Fans
Remixed the A4T Rapido UHF to fit the Rapido X. 4010 and 4015 fan compatible (like the A4Tv2), both Orbiter and Sherpa/G2 compatible. The Rapido sits rotated 45 degrees so the wires come out one of the rear corners. Printed and installed…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
TV06 and A4T/Xol Compatibility Mod
Print in ABS/ASA with standard Voron settings. Either print the single or two-piece Y carriage version and 2x of the belt clips. If you are using the single Y carriage version, it is recommended that you print at a 45 degree angle for…
P
Printables
A4T Sherpa Mini SB2209 Mount
Wanted to avoid purchasing a new tool head control board but wanted better performance than what was available form orm Stock Stealthburner. Mount has been test fit with an A4T tool head on a XOL carriage, but should also work without…
P
Printables
Cartographer V4 Xol/A4T Carriage Probe Module Mount
New nozzle to probe Y offset is now 21.65mm instead of 22mm.
P
Printables
A4T Dragon UHF Carto Cnc mount
Modified the UHF mount to mount to the Cartographer Cnc mount without having to modify the Cnc mount
P
Printables
Beacon/Carto spacers for Vitalii3D XOL/A4T mount
When you use the Vitalii3D XOL/A4T Mount for Voron Printers it's possible that your Beacon/Carto is hitting the hotend. In my case it was the Trianglelab Dragon Ace Volcano where Beacon hits the sock/heater block. The hotend is also in…
P
Printables
Endstop bumper CNC Parts with Xol/A4T
Hello! While upgrading my V2.4 i ran into a problem with my X Endstop. It would not get triggered when mounted on the toolhead mount. This happens in the combination with the CNC Xol/A4T mount with CNC Live idler XY joints from Vitalii3D.…
P
Printables
SV08 - A4T Filament Cutter ARM
Hey Guys, i am voronizing my Sovol SV08, for this i build the A4T Toolhead with the CNC Crossbow Filament Cutter. To Use this Cutter, there was no Model for a fitting Depresser Pin to actuate the Filament Cutter. So here we are, i made…
P
Printables
A4T WWG2 EBB36 Gen2 Toolhead Board Mount
Edited the existing WWG2 mount to support the EBB36 Gen2. Added clearance under the top of the board and slightly increased the standoff height.
P
Printables
Orbiter v2 a4t crossbow cutter adapter support ptfe
this is a simple adapter that you put between crossbow cutter and the orbiter to ensure full movement of the cutter. I had a problem with other adapters that my filament would sometimes hit the cutter due to filament coming out at an…
P
Printables
Eddy Coil mount for A4T toolhead on SimpleCore
my short ruthex m3 incerts just dropped in the original holes.. no heating required... (and i geuss it could be hard to get an iron in down there.. i used ordinary length ruthex M3 incerts on the "new poles" in the bottom plate i also…
P
Printables
Fysetc H36 Backplate for A4T / Wristwatch G2 (with and without PUG)
I needed a backplate to mount the Fysetc H36 Combo v2 to my Wristwatch G2 on my A4T. Ziptie Version This version only has a strain relief with zipties. You need two heatset inserts for mounting the H36 to the backplate and two zipties.…
P
Printables
A4T mount for SOVOL ZERO Beta
made mount to fit A4T toolhead in Sovol zero, but its beta, no idea about canbus board.
P
Printables
A4T Papilio Extruder Adapter
A new toolhead that seems to be gaining popularity is Armchair Engineering's A4T . I decided I was going to try it out, but I realized that my extruder wasn't going to fit. I recently switched to KevinAkaSam's Papilio Lite extruder, and…
P
Printables
A4T EBB42 Mount
I have a model of the wire thing on the USB side, but ended up just using my existing CAN setup.
P
Printables
A4T Revo Catographer/Beacon/SZP front mount
A front mount for the A4T Revo Voron. This works with any mount system although does make the front mount lights not really fit. The photo uses a small 2mm shim however this version has it built in.