ZeroG FMG A4T Crossbow Depressor 6mm & 9mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
FMG mounted 6mm & 9mm Crossbow depressors for use with the A4T hotend.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Took ideas from other depressors but couldn't find a mount setup I liked. Ended up designing this and have been very happy with it. Explicitly designed for mounting on top of the FMG either 6mm or 9mm.
I use ASA and a 10-20% infill with 2 or 3 walls/top/bottom. You don't want the part too strong - as in the event of a failure you want the part to fail rather than damaging the crossbow or the FMG.
You may need to adjust the cut positioning in your scripts whenever you re-tension your belts - though I have found in my setup that with the usable range (tolerance on the cutting range from crossbow & cut macro) is enough that i don't always need to make changes after re-tensioning as the position is within a few mm.
