1 / 2
ZeroG FMG A4T Crossbow Depressor 6mm & 9mm — zdjęcie 1
1 / 2

ZeroG FMG A4T Crossbow Depressor 6mm & 9mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

FMG mounted 6mm & 9mm Crossbow depressors for use with the A4T hotend.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
30
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Took ideas from other depressors but couldn't find a mount setup I liked.  Ended up designing this and have been very happy with it.  Explicitly designed for mounting on top of the FMG either 6mm or 9mm. 

I use ASA and a 10-20% infill with 2 or 3 walls/top/bottom.  You don't want the part too strong - as in the event of a failure you want the part to fail rather than damaging the crossbow or the FMG.  

You may need to adjust the cut positioning in your scripts whenever you re-tension your belts - though I have found in my setup that with the usable range (tolerance on the cutting range from crossbow & cut macro) is enough that i don't always need to make changes after re-tensioning as the position is within a few mm.

Tagi