1 / 3
Sherpa mini toolhead board spacer/brace for A4T/SB2209 mount — image 1
1 / 3

Sherpa mini toolhead board spacer/brace for A4T/SB2209 mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I didn't have the correct spacers so I made a little printed part, it also serves as a brace and a bracket.

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
70
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Compatibilty and design choices

I have used the a4t sb2209 toolhead board mount from the design I based this remake on, but this should fit any toolhead board mount on the Sherpa Mini designed for 20mm/16mm spacers, depending on the length of the motor on the Sherpa Mini.

Other than that it looks cool and just sits on top of the extruder motor and provides some bracing, I mainly added the holes for ventilation.

Print instructions

I've printed mine in ABS using Voron spec, so 0.4 nozzle, 0.2mm line height, 0.4 line width, 5 walls/top/bottom 40% infill etc. It should require no supports to print.

Required materials

For the regular/honeycomb spacer:

  • 4 x m3x5x4 heat inserts

  • 4 x m3x16mm bchs bolts

For the sb2209 version including daughterboard brace:

  • 5 x m3x5x4 heat inserts

  • 4 x m3x16mm bchs bolts

  • 2x m3x6 bchs or m3x8 bchs bolts

For the actual toolhead board mount:

  • 2 x m3x16mm bchs bolts

Installation instructions

Install the the four (or five) heat inserts into the spacer, I used a soldering iron @ 280 degrees, be careful, it's a small part.

If you want to use the daughterboard, this is a good moment to install the little bracket on the extra heat insert you put in on the bottom, use a short bolt like m3x6 or m3x8.

For mounting the spacer itself, you use two m3x16mm bolts to mount it to the sherpa mini and you're essentially done with installing it, you simply can't line it up wrong.

After this you install the toolhead mount using another other two m3x16mm bolts.
The toolhead board itself is mounted with you guessed it, two more m3x16mm bolts.

For mounting the daughterboard, plug it in and attach the m3x6/8mm bolt to the bracket don't do it up fully or add a 2mm shim behind the board as not to damage your cables or connectors.

Happy printing!

Tags