Search results: sb2209

Counting matching models…

Printables

SB2209 USB can-bus cable holder

This allows the SB2209 USB can-bus cable to stay in place with a pair of cable ties.

Printables

A4T Sherpa Mini SB2209 Mount

Wanted to avoid purchasing a new tool head control board but wanted better performance than what was available form orm Stock Stealthburner. Mount has been test fit with an A4T tool head on a XOL carriage, but should also work without…

Order a print of this model

Printables

ClockWork2 SB2209 Umbilical CAN Cable Bridge with PG7 mount

This support allows the use of a PG7 cable gland on the StealthBurner toolhead when using the SB2209 CAN board, providing a cleaner, safer, and more reliable cable management solution. The design properly guides the CAN cable, reducing…

Order a print of this model

Printables

Galileo2 EBB SB2209/2240 cable strain relief with Cable Chain Arm (Voron Trident)

This design bring you the capability for a Voron Trident with Galileo2 and EBB SB2209/2240 to have a chain mount and a relief connector for the CAN Cable. Printing information No need support but ... ABS or ABS-CF 5 walls & top/button 40%…

Order a print of this model

Printables

Voron StealthBurner SB2209 / SB2040 misalignment protector

BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…

Order a print of this model

Printables

SB2209 / SB2240 - CW2 Cable Bridge, PG7

Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…

Order a print of this model

Printables

Galileo 2 EBB SB2209 USB strain relief cable holder

The project has been adjusted to the EBB SB2209 USB board. Please use an empty PH connector (you should have spares anyway, delivered with a board) to isolate the piano wire from the port. Piano wire available on amazon My 3d design…

Order a print of this model

Printables

Galileo 2 Bigtreetech EBB SB2209 USB Front Body and Cover

The left side guard of the front body is removed for the pin clearance. Attached a vented cover to be used together with the body.

Order a print of this model

Printables

Galileo 2 SB2209/SB2240 CAN bus Umbilical Mount

Quick and dirty SB2209/2240 CAN bus umbilical mounting post for Galileo 2 Extruder. Use a M3x50 SHCS to mount the post instead of the cable chain holder, then fixate the umbilical with a zip tie. Print without support to keep the cavity…

Order a print of this model

Printables

Galileo 2 BTT sb2209 usb

this is a modified version of the Galileo 2 extruder front that allows the use of the bigtreetech sb2209 usb board. The original prevented the board to fit so I have adjusted a few areas to enable the board to sit correctly.

Order a print of this model

Printables

ERF Filament Cutter G2E EBB SB2209 USB

https://github.com/juliusjj25/G2E-Filametrix-Lever-Switch-Mod Without supports. In one of the latest updates, Fusion 360 significantly reduced the model quality when exporting to STL (fewer polygons). Because of this, I now export from…

Order a print of this model

Printables

Filametrix Body (CW2) for SB2209/SB2240 with Dual Filament Sensors and ECAS - larger ball bearings

Modified to work with 6.3mm balls i got from an old bike bearing. The original description also says that it's not compatible with original hotend mounts, but that's what I'm using and it works so idk.

Order a print of this model

Printables

Galileo 2 EBB SB2209 Cable Gland Mount + Lid

All the models I could find that used " PG Cable Gland M12 " for the SB 2240/2209 CANBus cable and worked with the Galileo 2 Extruder didn't work as expected. Some had a design flaw that caused more stress on the cable than relief; others…

Order a print of this model

Printables

SB2209 USB can-bus cable holder

This allows the SB2209 USB can-bus cable to stay in place with a pair of cable ties.

Order a print of this model

Printables

Stealthburner SB2209/SB2240 misalignment protector for G2E

The original SB2209 misalignment protector didn't work for me with G2E (using https://github.com/IRTrail/G2E-Filametrix ). The raised part next to the pins doesn't fit inside the opening the G2E body leaves. This version flattens the part…

Order a print of this model

Printables

SB2209/SB2240 - CW2 Cable Bridge, PG7 w/ Cutout for Can Cable

Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount with a cutout for the cable/screw in portion. Make sure to route the…

Order a print of this model

Printables

Updated - CW2 main body - ebb_sb2209/2240 with filament_sensor to reflect the lastest version.

Order a print of this model

Printables

Galileo2 BTT EBB SB2209 USB V1.0 Cable Strain Relief Support

To get the SB2209 USB to fit my Galileo2, I de-soldered the I2C connector and it fits perfectly. The cap-head bolt in this is M3x40, so you don't have to find an impossible M3x50. It has a zip-tie routed slot as well as steel cable mounts.

Order a print of this model

Printables

SB2209 CW2 Horizontal Cable Bridge, PG7

I wanted a pg7 mount to route the cable out behind the stealthburner, horizontally centered on an enderwire (switchwire) build. The pg7 cable does not run into the vertical extrusion on either side and is a decent route to push the…

Order a print of this model

Printables

Steathburner cover for galileo2 and SB2209 with fan

This is a Voron StealthBurner mod to allow the printer head boards like SB2209 and others to work more cooler. This is done to a 350mm Voron 2.4 but can fit other print sizes using SteathBurner. Print with supports like on the picture.

Order a print of this model

Printables

SB2209/SB2240 PCB motor mount

v0.0 not tested

Order a print of this model

Printables

Cable Support for SB2209 USB

Remade the entire dragchain support to hold the SB2209 USB plug in place. I felt like it could be ripped off or worse and since that cable is not dragchain-rated, I'll use zipties to tie it to the bowden tube. Might make a hole or a…

Order a print of this model

Printables

Stealthburner Fan cover for BTT EBB sb2209 (rp2040)

If you are using a BTT SB2209 toolboard, you will also have to print their Stealthburner motor plate, as it provides more room for the toolboard. As such, they have made available a cover for this that fits perfectly with the new motor…

Order a print of this model

Printables

PUG Mount for G2E (Galileo 2) Compatible with BTT SB2209 CAN

A very simplistic pug mount for g2e working with btt sb2209 can

Order a print of this model

Printables

StealthBurner_main body_cpap_lgx lite_goliath air_sb2209/40

Voici un remix d'un stealthbuner main body compatible avec goliath air, lgx lite, sb2209/40, et cpap. Récupérer le reste des pièces des 2 fichiers d'origine.

Order a print of this model

Printables

Galileo 2 G2E PUG Umbilical Mount (support to SB2209 usb connection)

This remix was made to allow usb connection with BTT SB2209 toolhead board as the original model blocks the USB input. PUG Clamp and Bottom Standoff parts as exactly the same of the original model, but I provided them here for…

Order a print of this model

Printables

Stealthburner Cable Cover for SB2209 RP2040

After buying and installing my SB2209 RP2040 onto my extruder, I realized that the cable cover didn't close. I tried to look everywhere but couldn't find an official version provided by BTT even though it is shown in the instruction…

Order a print of this model

Printables

3mm spring steel EBB SB2209 updated CAN cable holder

I modified the module to use 3mm spring steel, for use with toolchanger umbilicall mods.

Order a print of this model

Printables

SB2209 RP2040 Cable Cover - Ventilated

Same model as before but with a hexagonal pattern cut out to allow for better airflow to the board

Order a print of this model

Printables

Voron Stealthburner CW2 with ECAS for BTT SB2209 USB

ECAS PTFE tube connector added to Voron Stealthburner for use with BigTreeTech SB2209 I have adapted main_body, latch and cable_cover from Voron Stealthburner for BigTreeTech SB2209 USB. It may also be compatible with SB2209 CAN.…

Order a print of this model

Printables

Galileo 2 G2E Umbilical Cable Relief Mount Compatible with BTT EBB SB2209 USB

I found the existing options for cable relief of the BTT EBB SB2209 USB were lacking in one way or another. So I made my own. My goals: Relieve strain on the umbilical cable. Compatible with the PUG system. Allow greater access to the…

Order a print of this model

Printables

Voron 2.4 umbilical mount for BTT SB2209 USB

UPDATE: I redesigned the toolhead side of the mount to prevent the break of cable. I printed in PLA with standard Voron settings, because I print only PLA with my Voron. Materials you need: -2x M3 heat insert (I used the standard Voron…

Order a print of this model

Printables

Stealthburner EBB SB2209 USB PCB cover with 3010 fan

I remixed the ventilated pcb cover for the EBB SB2209 USB V1 to mount a fan because the RP2040 kept overheating. Use 4xM3 heatset inserts and M3x14 screws to mount a 3010 5V fan, the fan can be plugged into the unused USB expansion ports…

Order a print of this model

Printables

Cable Support for SB2209 USB (CW2)

To solve the issue of the EBB SB2209 USB cable coming loose during setup—where even the slightest bump could disconnect it—I took @Kahn Tigre’s original part of his wrap-around USB mount and modified it. I extended the design by adding a…

Order a print of this model

Printables

Voron-Trident Stealthburner CW2 Bambu-Schleppketten Halter für Canbus und BTT SB2209 RP2040

Es werden noch 2 Schlosserscheiben für M3 und eine M3x30mm DIN912 benötigt. Die zwei Schlosserscheiben werden mit einem leichten Fett oder Ölfilm belegt und zwischen Halter und Fahne montiert um ein reiben von Kunststoff auf Kunststoff zu…

Order a print of this model

Printables

Voron CW2 BTT SB2209 (RP2040) CAN printed part with threads for gland

The red model. White is original. Orient to print as shown in the photos. Use supports on build plate. Here printed in PolyLite ASA.

Order a print of this model

Printables

PG7 holder for Voron SB with SB2209

See pictures

Order a print of this model

Printables

G2 Galileo 2 SB2209 USB toolboard fan 30mm

G2 Galileo 2 SB2209 USB tool board fan 30mm with heat set inserts.

Order a print of this model

Printables

Voron Stealthburner Cover Galileo 2 G2E EBB SB2040 SB2209 Cable Cover

It didn't help with the high temperature of the toolhead mcu temperature but it's lighter.

Order a print of this model

Printables

Voron Stealthburner Cover EBB SB2040 / SB2209 Remix

This was a remix of the original it did not fit my Stealthburner there was a 4MM gap missing and it would not fit so I added the missing 4MM gap for my Stealthburner so its fits perfectly now

Order a print of this model

Printables

SB2209 Large Gear Clockwork2 HGX (and FilamATrix alpha version)

A small remix of Large Gear Clockwork2 HGX that allows you to use SB2209 CAN or SB2209 RP2040. Also available in Meowburner version. There may be minor errors in the model. Fan cover BOM 4x M3x12 BHCS - DON’T OVER-TIGHTEN The bolts are…

Order a print of this model

Printables

BTT EBB SB2209 DIN Rail USB Mount

You will need 2 M3x5x4 Thread Inserts (for Voron): https://cnckitchen.store/products/made-for-voron-gewindeeinsatz-threaded-insert-m3x5x4-100-stk-pcs

Order a print of this model

Printables

Galileo 2 G2E PUG Umbilical Mount (sb2209)

Didn't like the other alternatives, so I made my own modifications to the design to accommodate the protruding USB-C port on sb2209 (rp2040). The only modified part is the mount. All other files are unchanged from the original.

Order a print of this model

Printables

XOL EBB SB2209 CAN (RP2040) - Mount

BOM: 3x M3 Tool head: https://github.com/Armchair-Heavy-Industries/Xol-Toolhead Board: https://github.com/bigtreetech/EBB/tree/master

Order a print of this model

Printables

SB2209 CW2 Horizontal Cable Bridge, PG7, M12 hole

Freecad model attached in case anyone needs to adjust the clearance for their print.

Order a print of this model

Printables

Clock PCB Cover for Formbot BTT EBB SB2209

The Formbot kit references a main body to house the BigTreeTech EBB SB2209 board that requires a slightly bigger PCB cover. This fits the model found on the Formbot GitHub page, but with the openings to allow for cooling of the PCB. If…

Order a print of this model

Printables

SB2209 Large Gear Clockwork2 HGX with senzor

filament senzor added

Order a print of this model

Printables

Voron Stealthburner CW2 BTT EBB SB2209 USB cover with fan

Remixed to fit different extruder frame (with angle cut at the botton)

Order a print of this model

Printables

A4T Sherpa Mini SB2209 Mount

Order a print of this model

Printables

BTT EBB_SB2209_USB-1 Strain support

print as is with bed only support abs 15 mins @ 9k 500mm

Order a print of this model

Printables

Stealthburner / LGX Lite PRO / EBB SB2209 USB / Front Anpassung / Mod

Dies ist ein angepasster Front Body für den Bondtech LGX Lite PRO . Da sich die Geometrie des PRO vom Standard LGX Lite unterscheidet, passte das Original nicht mehr. Ich habe das Design modifiziert, damit der LGX Lite PRO perfekt sitzt.

Order a print of this model

Printables

ClockWork2 SB2209 Umbilical CAN Cable Bridge with PG7 mount

Order a print of this model

Printables

BigTreeTech SB2209 SB2240 PCB Fan with Swiss3DC Hotend

Swiss3DC hotends use dual heater with rather big connectors. To have enough space below the cover, the fan is moved a little bit

Order a print of this model

Printables

Voron_printhead_Clockwork2_CW2_chain_CAN_cable_anchor_springsteel+umblical_EBB_SB2209 CAN BUS

Made a small change of SB2209 anchor for clockwork2. During my assmbly I couldn't find an anchor component that fits both spring steel and an umblical. So I simply combined two I found on the website. One from the official clockwork2 stl,…

Order a print of this model

Printables

Cable Cover EBB-SB2209-USB

Modified to match the SB2209 USB version

Order a print of this model

Printables

SB2209 tall PUG Mount

PUG mount for higher plug boards

Order a print of this model

Printables

Galileo 2 BTT SB2209 ECAS

This is just an ECAS version of the modified file from @Demond_524393 No great skill on my part! :-) I printed mine in ABS-GF, 40% infill, 5 top & bottom layers. Usual kind of things.

Order a print of this model

Printables

Galileo2 EBB SB2209/2240 cable strain relief with Cable Chain Arm (Voron Trident)

Order a print of this model

Printables

Repositioned SB2209 Support Bracket for Sherpa Mini (dragonburner)

This is a tweak of the support bracket only to pull the hole over in X/Y/Z. Print multiple copies to get a clean print.

Order a print of this model

Printables

Galileo 2 Extruder Adapter for Bigtreetech EBB SB2209 USB (no Filamentrix)

Rivista la posizione delle viti di fissaggio della Tool Board, spostata all'interno di 0,5mm, adesso il frontale dell'SB arriva a contatto senza forzare e l'apertura della struttura all'altezza del connettore 10 PIN. Adesso gli inserti…

Order a print of this model

Printables

StealthBurner Galileo2 with Bigtreetech EBB SB2209 USB

I switched to the BigTreeTech EBB SB2209 USB model and realized that it is much larger. I also use the Galileo 2 Extruder, and BTT provides beta STEP files. I used two extruder body parts to fit the board and modified the rest based on…

Order a print of this model

Printables

Galileo 2 - Cable Cover with fan 30 30 10 for EBB SB2209 USB

Aggiunta una ventola di raffreddamento per le alte temperature della EBB SB2209 USB, gli spazi sono sufficienti per i connettori ed i fili e chiude perfettamente. Added a cooling fan for the high temperatures of the EBB SB2209 USB, there…

Order a print of this model

Printables

XT30 2+2 Plug for SB2209 / SB2240

A purpose build XT30 2+2 plug designed for the 🥰 BTT SB2209 / SB2240 toolhead boards. Built with a minimal footprint to keep your cable routing clean and uncluttered. Companion Model: Use the Cable Bridge PLUS to form a sleek and ultra…

Order a print of this model

Printables

Cable Bridge PLUS for SB2209 / SB2240

Installing a 🥰 BTT SB2209 on my Voron Stealthburner/CW2, I wasn't satisfied with the available umbilical solutions. So I started from scratch, explored different approaches, and designed this Cable Bridge PLUS. It ended up not that…

Order a print of this model

Printables

SB2209 + PG7 Stealthburner Mount + strain relief wire attachment

Exactly the same as the original by Condorman, just bend the wire through and cut it off.

Order a print of this model

Printables

Stealthburner CW2 Mainbody with Bowden Connector PC4-M6x1mm include for BIGTREETECH EBB SB2209

I realised this simple mod is missing in the community. The ability to add a bowden connector and lock the PTFE tube in place. Useful for multi-material filament change setup. Nothing else is changed or modified from the original Step…

Order a print of this model

Printables

Voron 2.4 - Stealthburner with 3DO nozzle cam & LGX lite & BTT SB2209 & umbilical mod

Print the front face together with the accents! Use supports for the door assembly (this is the most critical part!). Some thread inserts are also needed (see photos). I uploaded the CAD-files, so you can use them for modifying or…

Order a print of this model

Printables

PG7 / CNLINKO LP-12 mount for SB2209 / SB2240

Version 2 This variation includes slots for zipties. This is particularly usefull If you are also routing the extruder cables through the umbilical instead of using the driver on your SB2209/SB2240. Replaces the Stealthburner cable anchor…

Order a print of this model

Printables

SB2209 / SB2240 mount for PUG

Note: This is for the original CAN cable that BTT shipped, with a small rectangular plug. They've started shipping a different cable with a different plug shape, which this STL is not compatible with. The existing PUG mount doesn't work…

Order a print of this model

Printables

Stealthburner + KNOMI+ Rapido UHF + LGX Lite + SB2209/SB2240 + 3DO NOZZLE CAM

Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…

Order a print of this model

Printables

BTT SB2209 Stealthburner Cover (REMIX) - FOR THE PRE JULY 2023 STEALTHBURNER CW2 DESIGN ONLY

This is a remix of the CW front cover part from Paul Trautner's “ Mellow SB2040 Stealthburner Cover with Fan ”, but now it also fits the BTT SB2209 CANbus board as well. This can use all the same fan covers as his model. The design (the…

Order a print of this model

Printables

SB2209 SB2240 PG7/CNLinko USB Strain Relief

same hardware as Nyx's linked below, CNLinko quick detach PG7 https://www.amazon.com/gp/product/B087MXNC7W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Order a print of this model

Printables

BigTreeTech SB2209 SB2240 PCB Fan

Remixed together Alexander's and BTT's Cable door for the voron stealthburner to work with the SB2209 / SB2240 If you want to use a controlled 3rd fan to cool your EBB SB2209/2240 use HyperToxic's guide to add that 3rd fan, pinout on the…

Order a print of this model

Printables

Voron Stealthburner Cover EBB SB2040 / SB2209

UPD : Added suitable for main body Voron-Stealthburner Thanks to @Ibot_3D for the idea. He inspired me with his design! But his model was a little hard to print and many (including me) could not print this model. I increased the spaces…

Order a print of this model

Printables

Stronger Hex Ventilated SB2209 SB2240 Door with 3007 Fan

Add 3007 fan and ventilation for your can board. I found other hex-holed remixes weak at the door edges and the holes messy to print on my non-voron printer in ABS. This is remixed to retain some strength instead of going super mesh holed.

Order a print of this model

Printables

Voron Cable Chain Cover for EBB SB2209/SB2204 Mod

This is a new cable chain cover for the Voron Switchwire with the EBB SB 2209/2204 and cable bridge, CW2 and other upgrades. https://github.com/bigtreetech/EBB This cover allows the chain to move back on the gantry for more chain…

Order a print of this model

Printables

Voron 2.4 A Drive SB2209/SB2240 can cable mount

I needed a simple cable route/mount for the included cable given with SB2209 and SB2240 kits. Just push the cable in and screw in just like the original design.

Order a print of this model

Printables

EBB SB2209 updated CAN cable holder

It seems that some people are getting a CAN cable with larger overmolding that doesn't fit the mount included in the EBB SB2209 repo. This is not a perfect fix, but it's good enough. I've included STEP files for remixing!

Order a print of this model

Printables

SB-KNOMI-SB2209/2040-UHF-LGX_lite

SB-KNOMI-SB2209/2040-UHF-LGX_lite (Yess i had a bit of Ringing)

Order a print of this model

Printables

SB2209/2240 LGX lite mount

I remixed the LGX lite mount because I felt the others are incorrect or just make things line up weird.

Order a print of this model

Printables

Stealthburner BTT SB2209 CAN Bus Toolhead System/Filament Cutter

Revisions 2024-03-26 Revised Main Body to incorporate Straightened Latch. Replaced corresponding Motor Plate as well. Overview This group of objects implements a CAN based Toolhead for the Voron 2.4r2 3D Printer. The design uses a…

Order a print of this model

Printables

BTT SB2209 Stealthburner Cover (Updated Remix)

This is a remix of a remix. I updated the Main Body uploaded by @MyStoopidStuff to incorporate the latest revisions from the Voron team. Please check the image if you are unsure if you need this part. The features in Red are the changes…

Order a print of this model

Printables

SB2209 + PG7 Stealthburner Mount

Modified Mike F's " SB2209 / SB2240 mount for PUG " for use with a PG7 Cable Gland. This one has M12x1.25 threads so the PG7 can screw directly in. 2 versions included, 1 has a cutout and one doesn't. I haven't tested this yet, but I'll…

Order a print of this model

Printables

BTT EBB SB2209/2240 Voron Vented Door

I saw my EBB toolhead driver was getting up around 90C! So something had to be done ASAP! I took BTT's EBB door and put the classic Hexagon “Bestagon” on it to make vents. One is just vents the other has mounts for heatset inserts and…

Order a print of this model

Printables

StealthBurner - KNOMI - CAN (SB2209/2240) - CPAP - NOZZLE CAM

This model has the followinnf features: CPAP mount (2 heat inserts on StealthBurner + CPAP connector) Nozzle Cam support with PCB mount on the right side of StealthBurner face + special cut to handle nozzle cam FPC BTT KNOMI BTT CanBus…

Order a print of this model

Printables

CW2 Main Body with SB2209 Cutout and ECAS

Added an ECAS connector

Order a print of this model

Printables

Cable holder for SB2209/2240

Order a print of this model

Printables

Voron Clockwork2 BigTreeTech EBB SB2209 SB2240

This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github and…

Order a print of this model

Printables

Voron Clockwork2 BigTreeTech EBB SB2209 SB2240 ECAS

Order a print of this model

Printables

Voron Clockwork2 BigTreeTech EBB SB2209 SB2240 3DO PCB cable cover

I added the 3DO pcb holder to the latest files from BigTreeTech for the EBB SB2204/SB2240 Clockwork2 main body and pcb cover.

Order a print of this model

Printables

Voron Stealthburner BTT SB2209 Thermistor Access

Modified both main body and cable cover to provide access to the thermistor header

Order a print of this model

Printables

Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount

A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief. I didn't want a bend in my cable, so I made this from scratch. Note: I do not use a cable cover (didn't want extra weight) so the…

Order a print of this model

Printables

Voron StealthBurner SB2209 / SB2040 misalignment protector

Order a print of this model

Printables

Galileo 2 G2E EBB SB2209/SB2240 Cover 25x25x7mm_Fan (Updated to Release 1.0)

This is a mod of the cable cover to add a 25x25x7mm cooling fan to cool the toolhead board. GitHub Link Updated 2023/12/12 per comments to improve printing. Thank you @indi8six_1180574 & @jetcat_560589 Updated 2024/4/4 to comply with G2E…

Order a print of this model

Printables

SB2209 SB2240 PG7/CNLinko USB Strain Relief

I just added a coutout hole in order to not have to disable the whole cable to remove it. The rigidity is good. I've been using it for more than a month now. Printed with Voron settings.

Order a print of this model

Printables

Galileo 2 3007 SB2209 / SB2240 / SB2040 CAN Bus PCB Fan

A remix of JaredC's Galileo 2 Cable Door and Alexander's SB2040 CW2 fan cover door I use HyperToxic's wiring schematic to have my CAN PCB Fan turn on when the extruder is used, Info is in his github…

Order a print of this model

Printables

Galileo 2 2507 Fan Cover for SB2209/SB2240

Maintain a unique style of Stealthburner. No screws reguired.

Order a print of this model

Printables

G2E (Galileo 2) cover for Canbus PCB (SB2040, SB2209 and similar) and 30x30 (3010 or 3007) fan

In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…

Order a print of this model

Printables

Stealthburner LGX lite mount for SB2209, filament sensor and filametrix.

use a 6x3 magnet for the filament sensor with a standard microswitch refer to the filametrix mod for fitting the heat insert. https://github.com/sorted01/Filametrix/tree/main

Order a print of this model

Printables

Galileo 2 SB2209 strain relief

Strain relief using a ziptie for Galileo 2 (G2E) extruder and SB2209 or SB2240 canbus board.

Order a print of this model