A4T - Toolhead for the Sovol SV08. Utilising all the parts from the original toolhead including planetary gears, stepper motor, hotend, tension arm, induction probe and toolboard.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SV08 Reuse Planetary Gears and toolboard in GW2 and Orbiter 2 footprint. Compatible with A4T, DragonBurner, Anthead.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 40
- Makes
- 0
- Views
- 378
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of models that repurpose the Sovol SV08 hotend (including microswiss), planetary gears, stepper motor and toolhead electronics. You will need extension cables for the original or microswiss hotend from Amazon. The original handle and tension arm with pin will be reused.
Print with the standard Voron part settings and lubricate the planetary gears and sun gear plate when installing.
I may include the full set for the A4T including carriage and printer.cfg setting in the future, This will include the eddy sensor mount and offsets.
Currently looking after my 98 year old mother with late dementia, so this is just a side project and WIP to help take my mind of things. The parts fit together in CAD and print well, but I have yet to install the gears.
****Warning**** Do not use the umbilical holder that comes with the Sovol enclosure, this will catch on the tool-board. Replace this with this :-
23/09/2026
Added untested btt Eddy mount for the vitalli3D CNC carriage and removed obsolete files.
Added BTT Eddy mount (must remove from case)
x_offset = 28.398
y_offset = 21.208
16/09/2026
Included a new front to the extruder and sungear, both are now lighter and performs superior to the v1. Added mount for the default SV08 induction probe. The btt eddy had been working great, but suddenly gave up the ghost.
LED's for the toolhead using the UART :- https://www.reddit.com/r/Sovol/comments/1dpfs3c/got_neopixel_working_off_of_uart_port_on_sv08/
[neopixel toolhead_leds]
pin: extra_mcu:PA10
chain_count: 3
color_order: GRB
initial_RED: 0.9
initial_GREEN: 0.9
initial_BLUE: 0.9
[gcode_macro TOOLHEAD_LIGHTS_OFF]
description: Turn off NeoPixel LEDs
gcode:
SET_LED LED="toolhead_leds" RED=0 GREEN=0 BLUE=0
[gcode_macro TOOLHEAD_LIGHTS_ON]
description: Turn on NeoPixel LEDs
gcode:
SET_LED LED="toolhead_leds" RED=1 GREEN=1 BLUE=1
Bed Mesh and offsets
[bed_mesh]
speed: 500
horizontal_move_z: 5
mesh_min: 3, 20 #17.5, 17.4 #10,10
mesh_max: 325,347 #320, 342 #333,340
probe_count: 9,9
algorithm: bicubic
bicubic_tension: 0.4
split_delta_z: 0.016
mesh_pps:3,3
adaptive_margin: 5
fade_start: 0
fade_end: 10
fade_target: 0
[quad_gantry_level]
gantry_corners:
-60,-10
410,420
points:
36,10
36,320
346,320
346,10
speed: 400
horizontal_move_z: 10
retry_tolerance: 0.05
retries: 5
max_adjust: 30
[homing_override]
gcode:
G91
G0 Z5 F1000
{% if not rawparams or 'Y' in rawparams %}
{action_respond_info('Homing Y')}
G28 Y
G90
G0 Y177.5 F6000
M400
{% endif %}
{% if not rawparams or 'X' in rawparams %}
{action_respond_info('Homing X')}
G28 X
G90
G0 X177.5 F6000
M400
{% endif %}
{% if not rawparams or 'Z' in rawparams %}
{action_respond_info('Homing Z')}
G90
G0 X177.5 Y177.5 F6000
G28 Z
G0 Z5 F1000
M400
{% endif %}
G90
axes: xyz
set_position_z: 0
# PLEASE REMOVE THIS WHEN USING EDDY
[probe]
#z_offset: 0
x_offset: -27.2
y_offset: 17.4
[probe_pressure]
pin: ^!PE12
x_offset: 0
y_offset: 0
z_offset : 0
speed: 1.0
12/09/2026
Updated the front of the extruder part and the toolboard backplate. Added eddy mount for the vitalli3D carriage. Included two versions as step files, one for the printed XOL carriage and the other for the Vitalli3D CNC carriage. Do not have the step file for the original A4T cowl, check the remix section and ask the author of the Cowl.
04/09/2026
Increased the size of the sungear ever so slightly.
Added Xol carriage bracket and modified the a4t toolhead. This ensures that the nozzle is in the same position as the original SV08 toolhead. The length of the XY belts are now to short on my machine so new 6mm g2 belts will be needed to mount this carriage.
I will supply the eddy sensor offsets when my belts arrive.
This is essentially a full kit that utilises the stock SV08 parts.
I purchased this kit https://www.onetwo3d.co.uk/product/a4t-fastener-kit/ which includes Neopixels. These can be connected to the UART on the toolboard.
10/09/2026
Supports https://vitalii3d.com/products/xol-a4t-mount-for-voron-printers
