1 / 1
Monolith Carriage for XOL/A4T
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heard some people had minor issues with the other XOL-Monolith-carriage, so here's a different approach
- Rating
- 0 / 5
- Likes
- 60
- Downloads
- 372
- Makes
- 0
- Views
- 2,305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An (experimental) A4T/XOL carriage for Monolith Gantry
- SCALE THE CLIPS IN Z (in the slicer) TO GET THE CORRECT CLIP FITMENT
- Information to find ideal height is found on the main Trinity Read.me, under “assembly”
- Uses the “universal Monolith belt clip" to hold the belts
- No in-built supports, please add those in the slicer yourself
- Check the other clamping system's github description for square nut sizes + print settings
- ApexClips are 0.1mm layer height
- Please comment if an issue is found
- 9mm only for now, if there is demand for 6mm, I'll post those files
- Only change to screw length is the ones going into the MGN12H carriage: those are now M3x10
Updates
- 19 October 2025
- Fixed top square nut interference issue
- Added 6mm + 10mm versions
Credits
- CloakedWayne for the SLM belt clamp
- Gerbz, Prooda, and Apex for the belt clamp and clips (Trinity uses ApexClips)
- DW Tas for XOL-toolhead + alternate monolith XOL carriage