1 / 1
Monolith Carriage for XOL/A4T
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heard some people had minor issues with the other XOL-Monolith-carriage, so here's a different approach
- Ocena
- 0 / 5
- Polubienia
- 60
- Pobrania
- 372
- Wydruki
- 0
- Wyświetlenia
- 2305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 8)Remiksy (1)Kolekcje (89)Powiązane
An (experimental) A4T/XOL carriage for Monolith Gantry
- SCALE THE CLIPS IN Z (in the slicer) TO GET THE CORRECT CLIP FITMENT
- Information to find ideal height is found on the main Trinity Read.me, under “assembly”
- Uses the “universal Monolith belt clip" to hold the belts
- No in-built supports, please add those in the slicer yourself
- Check the other clamping system's github description for square nut sizes + print settings
- ApexClips are 0.1mm layer height
- Please comment if an issue is found
- 9mm only for now, if there is demand for 6mm, I'll post those files
- Only change to screw length is the ones going into the MGN12H carriage: those are now M3x10
Updates
- 19 October 2025
- Fixed top square nut interference issue
- Added 6mm + 10mm versions
Credits
- CloakedWayne for the SLM belt clamp
- Gerbz, Prooda, and Apex for the belt clamp and clips (Trinity uses ApexClips)
- DW Tas for XOL-toolhead + alternate monolith XOL carriage