TV06 and A4T/Xol Compatibility Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mod modifies the Y carriages and Xol Carriage Clips to enable A4T and Xol compatibility.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 37
- Makes
- 1
- Views
- 703
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print in ABS/ASA with standard Voron settings.
Either print the single or two-piece Y carriage version and 2x of the belt clips.
If you are using the single Y carriage version, it is recommended that you print at a 45 degree angle for strength so that the carriages are less prone to cracking.
BOM for two-piece Y carriage:(in addition to the original screws, bearings and idlers):
6x M3 nuts
2x M3x30 socket head
3x M3x20 socket head
1x M3x12 socket head
2x M5x20 socket head
2x M5 heatset inserts (smallest you can find with 7mm OD and 4mm depth)