Counting matching models…
Print in ABS/ASA with standard Voron settings. Either print the single or two-piece Y carriage version and 2x of the belt clips. If you are using the single Y carriage version, it is recommended that you print at a 45 degree angle for…
Triple Z mod inspired by the Voron Trident with a magnetic bed mount solution from . GutterGames_CA . Print in a stiff filled material such as ABS/ASA CF/GF. BOM: 18x M5x10mm BHCS 4x M4x8 BHCS 20x M3x12mm SHCS 2x M3x10mm BHCS 16x M3x8mm…
Make sure you print using ABS or ASA(recommended) as the heatbed can get >100C when printing those materials. Do not print using PLA as it will deform even at “low” temperatures. Print with the largest surface on the heatbed.
Rear skirts: Requires 4x M4x8 socket head screws and 4x M4 T nuts to mount to extrusions. Use auto supports for the cantilevered bit, avoid ABS/ASA as it may warp at that section. Side skirts: Requires 12x M3x8 socket head screws and 12x…
BOM (unfinished) 2510 Fan 1x Peopoly long 1x Voron M3 Heatset 6x M3x8 SHCS 4x Material and print settings You will want to use ABS-GF or stiffer plastic for it to survive. May the odds be ever in your favor.
You can color the decoration parts to a separate color in the slicer. I went for 2 layers of the color, which means you need to do 3 swaps, but they are in rather quick succession. The mirrored versions should fit the other side. The…
The mounting holes was too big and the hole for the M10 PC4 was too small so i remixed it a little bit now it sits flush
Update 5.06.25 Since i switched to the a4t toolhead with the afc cutter, i adjusted my cutter block, so that it creates a minimal footprint. Original I wanted to install a toolhead cutter for my dragonburner with a sherpa mini extruder. I…
Print in ABS/ASA with standard Voron settings. Either print the single or two-piece Y carriage version and 2x of the belt clips. If you are using the single Y carriage version, it is recommended that you print at a 45 degree angle for…
Important: this will interfere with the internal spool holder - you will need to remove it and mount your spools externally. Print in ASA or higher temp tolerance material. I've added some aluminium tape as added insulation due to…
Triple Z mod inspired by the Voron Trident with a magnetic bed mount solution from . GutterGames_CA . Print in a stiff filled material such as ABS/ASA CF/GF. BOM: 18x M5x10mm BHCS 4x M4x8 BHCS 20x M3x12mm SHCS 2x M3x10mm BHCS 16x M3x8mm…
The Terminal Velocity 06 project is a conversion project aimed at bringing high speeds to SV06 3D printer owners. Originally developed as a branch of the ProosaXY, the TV06 has taken on a fully unique form now as it moves into full…
The long one is for the top of the 2 500mm (700mm on the plus) front extrusions to create holes for the blind joints that attach to the 3 extrusions that run rearward on each side The medium sized one is for the back of the Y axis where…
These are alpha files. Understand they are only functional parts and are missing some features potentially. GitHub Discord Community
This is a combination toolhead cutter/filament runout sensor for the TV06 (Core XY SV06 conversion). This is confirmed to work with the TV06 and might work on the TV06+. The runout sensor threads into the top of the cutter, but if it is…
An alternate hinge design for the TV06 Core XY printer, that is loosely based on the 270° Front Panel Hinge by chrisrgonzales. The bolt pattern for the door panels matches up with the stock TV06 panel dimensions.
2x M4x12mm required Print orientation as shown on the pictures Normal Support on plate only, 0.3 top z distance
The requirements are the DIN rail itself, 300mm in size and some M3 heat inserts for the mounts, and of course the screws, 2x M3x20mm and some M3x8mm. Mounts based on AndrasBognar designs
This is a remix of the skirt feet on the TV06. This adds a pocketed M5 leveling foot and keystones (if desired). The pads are printed in TPU and should fit snuggly into the bodies, a small amount of glue or double sided tape can be used…
This is my first remix where the feet for the TV06 has been modified to be compatible with Voron rubberised feet or the Voron Trident adapter for the Hula system (https://www.printables.com/model/898357-hula-for-voron-printers)…
Print using PETG/ASA/ABS. No overhangs required. Use original screws from SV06 screen
Heavy remix of the Quickdraw2 servo dock BOM: 1x 6x3mm magnet 2x m3 heat-set inserts 2x m2x6 self-tapping screws 1x m2.5x8 2x m4 T-Nuts 2x m4x8 screws 1x mg90s servo 180deg (360 will do as well, but I've found that the 90 degree servos…
