TV06 Modified R2.1 Rear and Side Skirts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows for the use of the original feet (R1.x) with the new R2.1 skirts on the rear and sides which are sturdier.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 1
- Views
- 120
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Rear skirts:
Requires 4x M4x8 socket head screws and 4x M4 T nuts to mount to extrusions.
Use auto supports for the cantilevered bit, avoid ABS/ASA as it may warp at that section.
Side skirts:
Requires 12x M3x8 socket head screws and 12x M3 T nuts to mount to extrusions.

To create the hexagonal pattern, use the Skirtmod.stl file to create a modifier in Orcaslicer (in the recessed section) using the following settings:
Sparse infill line width: 0.42mm
Top shell layers: 0
Bottom shell layers: 0
Alternate extra wall: Yes
Sparse infill density: 22%
Sparse infill pattern: Honeycomb
Sparse infill direction: 60 degrees
Ensure vertical shell thickness: None
.3mf file uploaded for convenience too if you don't want to do the above.
The resulting slice should look like this: