TV06 Modified R2.1 Rear and Side Skirts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows for the use of the original feet (R1.x) with the new R2.1 skirts on the rear and sides which are sturdier.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 121
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Rear skirts:
Requires 4x M4x8 socket head screws and 4x M4 T nuts to mount to extrusions.
Use auto supports for the cantilevered bit, avoid ABS/ASA as it may warp at that section.
Side skirts:
Requires 12x M3x8 socket head screws and 12x M3 T nuts to mount to extrusions.
To create the hexagonal pattern, use the Skirtmod.stl file to create a modifier in Orcaslicer (in the recessed section) using the following settings:
Sparse infill line width: 0.42mm
Top shell layers: 0
Bottom shell layers: 0
Alternate extra wall: Yes
Sparse infill density: 22%
Sparse infill pattern: Honeycomb
Sparse infill direction: 60 degrees
Ensure vertical shell thickness: None
.3mf file uploaded for convenience too if you don't want to do the above.
The resulting slice should look like this: