H36 Toolhead board for WWG2/A4T (PUG)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple H36 board to be used with the PUG system on a WWG2 extruder. Compatible with A4T.
- Rating
- 1 / 5
- Likes
- 15
- Downloads
- 72
- Makes
- 1
- Views
- 443
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
A simple H36 board to be used with the PUG system on a WWG2 extruder. Compatible with A4T.
Will require :
4x M3 heat insert (voron specs)
4x M3 screws (8 or 6 mm should work).
1x M3x35 for the extra mounting point on the WWG2 body itself
2x M3 screws of the appropriate length depending if you're using threaded spacers or hollow to mount the toolhead board mount to the back.
Print the appropriate PUG for your cable. If using the stock H36 can cable, you can use a 5.5mm PUG for maximum gripping. if too tight, go for a 6.0mm.
Depending on your machine, this may require a top hat to extend the Z height (especially on trident-type machines). For me, it required around 60-65mm of extra height.