H36 Toolhead board for WWG2/A4T (PUG)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple H36 board to be used with the PUG system on a WWG2 extruder. Compatible with A4T.
- Ocena
- 1 / 5
- Polubienia
- 15
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 432
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
A simple H36 board to be used with the PUG system on a WWG2 extruder. Compatible with A4T.
Will require :
4x M3 heat insert (voron specs)
4x M3 screws (8 or 6 mm should work).
1x M3x35 for the extra mounting point on the WWG2 body itself
2x M3 screws of the appropriate length depending if you're using threaded spacers or hollow to mount the toolhead board mount to the back.
Print the appropriate PUG for your cable. If using the stock H36 can cable, you can use a 5.5mm PUG for maximum gripping. if too tight, go for a 6.0mm.
Depending on your machine, this may require a top hat to extend the Z height (especially on trident-type machines). For me, it required around 60-65mm of extra height.