Liczymy pasujące modele…
NH36/EBB36 WWG2 mount for PUG I find PUG to be far superior to PG7 mounts, so made this guy. Additionally, the NH36 connector sticks up really high, so this also lowers the cable a bit. This is based off tetsu and Thor's existing canboard…
Wrist Watch Galileo Extruder - SHT36 Max V3 toolboard mount - other toolboards may fit. Required to be remixed to fit Mello Over Molded cables and Xt30 connectors Requires use of Heatsert brass threaded inserts Mainly designed for use…
This was modeled directly from the Rev C (v1.4) Nighthawk 36 CAD, and adds a couple features above and beyond what other offerings currently have. There are wire management hooks to hold wires in place. Zip ties can be used around the…
A mounting solution for use with WWG2 extruder & EBB36 toolboard, remixed from SputnikOC3D's model for the SHT36 Max. This mod offers more clearance around components on the back of the EBB36 that were previously clashing with the printed…
I didn't like how bulky the available mounts for the NH-36/WWG2 were, so I made my own. This model is a split design so that features can more easily be printed on both sides. The cord grip is PG-7 threaded. Print 1x g2_mount and 1x…
This is a mount for my StealthChange setup. This will fit on a WWG2 with a EBB36, it also clears the OptoTap. There's also a hole for a spring steel support for the umbilical. You'll need 2 M3 heat insert (Standard Voron M3s M3x5x4mm) to…
kept having to dig for this to share it out and it was locked behind a VOC channel. created by user Thor. Original WWG2 can be found here https://github.com/tetsu97/WristWatch-G2-Extruder/tree/main
The main change from the original mod is making the unit taller and adding a room for the ptfe tube to insert further. This makes the filament path straighter for longer before it hits the filament sensor. This greatly improved the…
I remixed the original model to fit and conform to the WWG2 extruder. One corner of the Magneto Filament Cutter will have to be filed down to allow a WW2G mounting screw to fit. Please see the included images.
Edited the existing WWG2 mount to support the EBB36 Gen2. Added clearance under the top of the board and slightly increased the standoff height.
I just needed a PUG and a mount for the XT30 (2+2) connector from the EBB 36 Gen 2. The mount is screwed onto the WWG2 and the X carriage from Vitalii3D. And if you don't cut the cables from the extruder motor too short like I did, you…
This is a remix of one of the WWG2 mounts that removes some features I didn't want to use and added a small section on the side to secure the cable too. This takes stress off of the connector since the wires have a few centimeters between…
This is a modified version of TheSin's PCB36 mount for Steath Changer and the Nitehawk36 toolboard PCB, for use with a modified version of the Stealth Changer backplate I removed the extra holes, and shifted the extruder mounting holes,…
A simple H36 board to be used with the PUG system on a WWG2 extruder. Compatible with A4T. Will require : 4x M3 heat insert (voron specs) 4x M3 screws (8 or 6 mm should work). 1x M3x35 for the extra mounting point on the WWG2 body itself…
To be able to mount EBB36 cover over this, I made heatinsert holes 1mm deeper on the mounting plate, so my 5mm M3 standoffs reach better to hold the PCB on it. Cover is then mounted on these standoffs with M3x20 screws. Also shaved 0.5mm…
Since the included CAN Cable for the EBB36 Gen 2 lacks stiffness, I added a PUG connector to the retention arm to allow me to use a braided sleeve and a steel wire with a PUG strain relief to onewordFOURWORDS' mount. The PUG itself was…
Just a custom knob that I thought worked well visually with the rest of my Anthead customizations. Drag all parts into your slicer and select the option to import all files as single object with multiple parts. I provided a picture on…
H36 - WWG2 mount for XOL/A4T Carriage and PUG I've used the A4T (XOL carriage) THB Mount for the WWG2 and combined a FYSETC H36 V1.3 with PUG rev. 1 - 29.10.2025 ------------------------------------------------ If anything is off or…
Use the other parts and instructions from the original file I remixed.
Modified WWG2 body and tension arm to Clear 5015 fans on the Reaper Toolhead, also added 3rd mounting hole on body.
This is a low-profile SHT36v3 board mount designed for Voron Trident printers. It may also fit the EBB36 board (not yet tested — if you’ve tried it, please leave feedback!). Changes from the original version: Mount lowered by 5 mm and…
you have to compensate for material shrinkage if printed in abs! 1% scale up worked for me!
This is my master file for my Dragon Burner. Modifications: 1.) This has WWG2 with dual filament sensors modified for a tighter fit, the filament sensor never triggered, the sensor was to far away from filament path. The Ecas now has a…
Heat inserts to go deeper so I can use 5mm standoffs to attach EBB36 to plate and then attach cover to standoffs.
Edit 2/11/26: Realized I accidentally uploaded an older version of the file that lacked the spacers for the EBB36. I decided to leave it up in case people prefer that, but the corrected version is now there as well. I have yet to test…
EB36 board comes with 21mm long brass standoffs. Using them results in the third point attachment leg not reaching the WWG2's body by 1.4mm. This remix simply adds 1.4mm to the length of that leg, so that you could use the 21mm standoffs…
A mounting solution for use with WWG2 extruder & Night Hawk or EBB36 toolboard, remixed from Tooks who remixed SputnikOC3D's model for the SHT36 Max. This toolboard is designed for use within the Draftshift Design Stealthchanger project,…
This will securely mount your Picobilical to your WWG2 extruder. There are a few different versions depending on your setup. In the pictures, I have installed picobilical_mount.stl and mgn7h_carriage_with_integrated_spacers.stl, and I am…
Extended builtin standoff by 2mm so you can use standoffs from EBB36 package. See original vs remixed from photos
I didn't need the 2nd (lower) filament sensor, so I've edited the CAD to remove it and added 2 access holes to allow for fixing the switch in place.
When using Anthead and the Carto CNC carriage with wwg2 I had some clearance issues. I created this quick little adapter
Since I haven't found any official cowling for the A4T for the new Rapido X for Xol carriage and wwg2/orbiter spacing, I modified the already existing cowling for the Radido UHF. The screw pattern and hole depth on top has been changed to…
I wanted a knob that it realy is possible to turn. The original knob is more decorative than usefull. Design is also a bit lighter. Printed with the voron recomendation.
Modified mount to accept Afterburner toolhead PCB for WWG2 - w/ additional leg for PDF splitter. It has been working on my trident for about 1000 hours. D
I shortened the arm part with the long screw so that it will sit closer to the back of the extruder motor. I also increased the counter-bore of the bottom two screw holes so that a standard size screw can be used in the shortened version…
Added cutout for BTT Piggyback36 extruder header to Rapidburner PCB mount for WWG2.
Intended for use with this filament cutter.
A mounting solution for use with WWG2 extruder & Night Hawk or EBB36 toolboard, remixed from Tooks who remixed SputnikOC3D's model for the SHT36 Max. This toolboard is designed for use within the Draftshift Design Stealthchanger project,…
Edited the existing WWG2 mount to support the EBB36 Gen2. Added clearance under the top of the board and slightly increased the standoff height.
I changed the lever to hold the blade and mate together better with larger pins. The case bottom now matches the WWG2 mount as well. After my first print, I realized how far the lever has to travel, so I did a further reworking of it to…
If you do not use the cutter, you need 10mm extra height else the extruder motor/ebb mount hit the CNC mount. Extended the original mount by 10mm. Installed and confirmed working!
Please check the original model for BoM, spacers, additional parts, and printing recommendations. You will need two additional screws and spacers (found in chirpy2605's repo)
Remix of therick EBB mount for Wirst-watch G2 with added mount for chamber thermistor (3mm)-----------------------------
Is this modification well done? No… Does it work? Probaby. I couldn't find any mount for the WWG2 extruder that worked well with the new EBB36 Gen2 toolhead board. Hopefully someone makes a better design so you don't have you use this.…
This is an edit of the WWG2 NH36 Mount for PUG because i rather wanted to use PG7 and didnt find any other good models
