WWG2 Picobilical Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount an LDO Picobilical toolhead PCB on a WristWatch G2 (WWG2) extruder. Use with or without carriage mount points.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 214
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This will securely mount your Picobilical to your WWG2 extruder. There are a few different versions depending on your setup. In the pictures, I have installed picobilical_mount.stl and mgn7h_carriage_with_integrated_spacers.stl, and I am using LDO's knurled M3 spacers they supply with a lot of their kits. If you don't have the spacers, you can download the one included in this model's files. BOM will change a bit based on your setup, but generally:
- 2x M3x6 for the motor mount points
- 2x M3x8 for the PCB mount points
- 2x M3x5x4 heatset inserts for the PCB mount points
- 2x M3x10 for the carriage mount points
- 4x M3x5x4 heatset inserts if you need to use the printed motor mount spacers
For a simpler setup, you can forego the additional carriage mounting points completely by printing picobilical_mount_no_carriage_stabilizers.stl.
Enjoy! Please let me know if you have feedback or need a small change, and I will see what I can do.