Counting matching models…
NH36/EBB36 WWG2 mount for PUG I find PUG to be far superior to PG7 mounts, so made this guy. Additionally, the NH36 connector sticks up really high, so this also lowers the cable a bit. This is based off tetsu and Thor's existing canboard…
A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Wristwatch BMG extruder. The original PUG download page (for the gland itself) is at…
Instead of using mechanical movements for watch builds, I wanted to use quartz movements like the Seiko VH31 and Miyota 2115. Since both quartz movements are similar is size and shape, this casing ring will fit both of them. I designed…
A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Galileo 2 Standalone extruder. The original PUG download page (for the gland itself) is…
A toolhead mount based around therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with an Orbiter 2 extruder. The original PUG download page (for the gland itself) is at…
This is a movement holder/casing ring for the Miyota 2035 (not 2305) quartz movement so it can be adapted for a case for Seiko NH series of mechanical watches. Great for mechnical to quartz conversions or for anyone looking to build a…
This is a replacement spacer / retainer ring for the NH36 seiko movement. Designed specifically around a 3.8 position NH36, but may fit other NH3x, NH7x movements. This is VERY detailed, and I am printing on a 0.25mm nozzle at 0.05…
This is an edit of the WWG2 NH36 Mount for PUG because i rather wanted to use PG7 and didnt find any other good models
A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Galileo 2 extruder. The original PUG download page (for the gland itself) is at…
A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Clockwork 2 extruder. The original PUG download page (for the gland itself) is at…
Just a simple model made from scratch, Includes 2x 18mm Stand offs Includes 1.5mm ‘nubbins’ to prevent shorting. Requires - 6x Brass inserts (including standoffs) or 2 if using without. - 2x M3x6 Countersunk/FHCS Screws - 2x M3x6 BH/SHCS…
A toolhead mount based around therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Clockwork 2 extruder. The original PUG download page (for the gland itself) is at…
Movement holder/casing ring for the Ronda 515 (and 515.24) quartz movement to be used in Seiko NH series watch cases (eg. NH34/NH35/NH36/NH38/etc) I sketched it up and exported it to STL. My Youtube build video: Print Settings Printer…
Movement holder/casing ring for the Miyota 2305 (NOT 2035!) quartz day date movement to be used in Seiko NH series watch cases. Since the Miyota 2305 movement is much smaller than the NH34/NH35/NH36 mech movements, a spacer is required to…
Remix of NH-36-WWG2-Xol for Orbiter extruder mounting. Adjusted model for better printing.
A toolhead mount based around therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with an LGX Lite extruder. The original PUG download page (for the gland itself) is at…
A mount for the Fysetc H36 (Note: V1.3 with the molded cable only! V1.2 coming soon) toolhead board to attach it to the back of a Sherpa Mini extruder and provide strain relief and retention for the connectors. The strain relief is not on…
EBB36 Mount for Reaper and Xol Xol2 with chain attachment point.
LDO Nitehawk-36 (NH36) Toolboard Orbiter v2 A4T toolhead mount Mount for installing a LDO Nitehawk-36 (NH36) toolhead board on an A4T toolhead using an Orbiter v2 / v2.5 extruder. Including bottom mounting slot for Xol-carriage.…
Movement holder/casing ring for the Ronda 515 (and 515.24) quartz movement to be used in Seiko NH series watch cases (eg. NH34/NH35/NH36/NH38/etc) I sketched it up and exported it to STL. My Youtube build video: https://youtu.be/m71-DxZAqvw
Slip ring Adaptef für 36 Schläuche Category: 3D Printer Accessories
I needed to replace my extruder on my SV08 because the sun gear wore out. I did not like the integrated baseplates and wanted a bolt in solution. Yes I know that it may be heavier but its easily modifiable or replaceable. I also wanted to…
A simple H36 board to be used with the PUG system on a WWG2 extruder. Compatible with A4T. Will require : 4x M3 heat insert (voron specs) 4x M3 screws (8 or 6 mm should work). 1x M3x35 for the extra mounting point on the WWG2 body itself…
I printed it in PETG. But anything will work.
H36 - WWG2 mount for XOL/A4T Carriage and PUG I've used the A4T (XOL carriage) THB Mount for the WWG2 and combined a FYSETC H36 V1.3 with PUG rev. 1 - 29.10.2025 ------------------------------------------------ If anything is off or…
Use the other parts and instructions from the original file I remixed.
Please be sure to have a fall protection measure since it is a 3D printed product. Install the genuine Bryton mount and attach it to the M3 screw on the back of the cockpit. Print Setting: Infill: 100% Material: PETG Support: Required…
Remixed Toolhead-Board Mount for NH36 (or similar) on BIQU Nebula
A toolhead mount based around therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Vz HextrudORT Low-PLUS extruder. The original PUG download page (for the gland…
I needed a backplate to mount the Fysetc H36 Combo v2 to my Wristwatch G2 on my A4T. Ziptie Version This version only has a strain relief with zipties. You need two heatset inserts for mounting the H36 to the backplate and two zipties.…
Introduction There are not many mounts out there for the FYSETC H36 board, so I had to come up with my own. I'm using Orbiter 2.5 extruders on DragonBurners for my toolchanger. This ring will fit v2.0 & v2.5 Orbiters. Printing Use…
My crossfeed gear key had been sheared off by the previous owner, and since everything is made of Zamak, there was no way to really repair it without silver brazing as solder would not stick and the original material melts at a very low…
Canyon H36 mount for Sigma BC 14.0 WL bike computer I've made for my friend.
A toolhead mount based around therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Vz HextrudORT Low-Motor extruder. The original PUG download page (for the gland…
I shamelessly stole the design from @punkkills' fantastic Micro 105 Quad to fit the board/motors of my H36-style quad. Sadly, the original is way too big for the H36 parts. (I do have the Scisky and bigger motors on order so I can build…
Note: Specifically for use with Vitalii3D's "XOL/A4T Mount" I am in no way affiliated with him, I just used his mount What it is: When assembling my A4T I did not like any of the toolboard mounts I found available. They all mounted them…
Print config: Whatever. Though it's recommended to print it in asa/abs with voron config. After assembling my machine I might see fit to add a piano wire for strain relief.
Extended builtin standoff by 2mm so you can use standoffs from EBB36 package. See original vs remixed from photos
I remixed Kyle's cable duct cover to include a spot to mount the Nitehawk 36 USB adapter board. This also uses standard Voron spec heatset inserts because I hate tapping into plastic. This is just the top cover only. Grab the bottom from…
LDO Nitehawk-36 (NH36) Toolboard WW-BMG for A4T toolhead mount Mount for installing a LDO Nitehawk-36 (NH36) toolhead board on an A4T toolhead using an WW-BMG extruder. Including bottom mounting slot for Xol-carriage.…
I saw a comment saying to flip it to get the PUG on the left side - so I did that and it tore itself in half in less than a day So I added some reinforcement onto the model and it's been reliable ever since, no signs of distress or wear &…
It is a simple device designed to fix the ZTE brand modem by hanging it on the wall and can fit on many printer tables.
BOM Item Qty M3x5x4 Heatset Insert 4 M3x8 SHCS 6 M3x20 Standoff 2
I store my NH movements in a small clear box and to prevent them from moving around in them I designed these. Not sure what to call them. You can have them face down with dial and hands as well. Category: Accessories
Please check the original model for BoM, spacers, additional parts, and printing recommendations. You will need two additional screws and spacers (found in chirpy2605's repo)
A simple mount, there are brackets so you can attatch it with straps.
Remix of therick EBB mount for Wirst-watch G2 with added mount for chamber thermistor (3mm)-----------------------------
i needed to adapt backplate and PCB plate for stealthchanger nh36 mount on anthead
Problem: Airtag inside the Carbon frame did not work that well because of Mr. Faraday. There are some other good places to put one such as under the saddle or integrated inside a water bottle holder. If I were a thief though those are…
The led lights were bothering me a bit and I also wanted a solution to add a fan if needed later, This is a toolboard cover for the H36 board from Fystech that works with my front mounted board for the Biqu Nebula mount on the Sovol SV08.…
I designed this mount to rigid mount the NH36 THB to both the Orbiter v2/2.5 and the Micron Anthead carriage. Just didn't like the floating THB on the motor by itself, since the cable is very happy to flop it around. Also, 4 screws must…
H36 fysetc mount for dragon burner and LGX lite,
Printed in ABS with 0.4 nozzle and 0.2 layer height.
Title sums it up. Do print in matte black, or paint the inside matte black to prevent internal reflections.
I cant remember/find where i got these from originally. good simple stick extenders for increased fidelity on the sticks. Category: R/C Vehicles
edit of the NH36 mounting bracket to accommodate stealthchanger mounting and tap sensor. also used m3x16 screws to mount this bracket to the standoffs to give the height for the tap pcb I used 3xm3 nuts as spacers
I shortened the arm part with the long screw so that it will sit closer to the back of the extruder motor. I also increased the counter-bore of the bottom two screw holes so that a standard size screw can be used in the shortened version…
SUNJOE (Sun Joe) PH3600C Cordless Power Pruners holder wall mount for holding pruners and keeping charging cord handy. Mount with two number six screws 40mm apart. Print as pictured. No supports needed.
A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Galileo 2 Standalone extruder. The original PUG download page (for the gland itself) is…
SUNJOE (Sun Joe) PH3600C Cordless Power Pruners holder wall mount for holding pruners and keeping charging cord handy. Mount with two number six screws 40mm apart. Print as pictured. No supports needed.
edit of the NH36 mounting bracket to accommodate stealthchanger mounting and tap sensor. also used m3x16 screws to mount this bracket to the standoffs to give the height for the tap pcb I used 3xm3 nuts as spacers
BOM Item Qty M3x5x4 Heatset Insert 4 M3x8 SHCS 6 M3x20 Standoff 2
I needed a backplate to mount the Fysetc H36 Combo v2 to my Wristwatch G2 on my A4T. Ziptie Version This version only has a strain relief with zipties. You need two heatset inserts for mounting the H36 to the backplate and two zipties.…
Print flat. Fiberglass mount extends down to screw holes to reduce cantilever forces. Update 11/AUG/2025: Stronger version, reinforced with an m3x45+ screw to give another zip tie point, 2mm fiberglass tube mount extended through the…
