Heewing T1 Vented Nose VTX and Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed a couple of CrunkleFloop T1 parts into 1. Fusion360 and STEP files included.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed mine with it standing on end as you can see in the pics. It printed good for me in this orientation and looks clean.
The template is so you can mark and punch holes in the bottom of the fuselage so you can take the VTX in and out if needed for some reason.
There are 4 different versions for different antenna tube diameters. I'm running some VAS antennas and they're 2.5mm thick. The original Walksnail antennas are 4mm. Ive also included mounts for 3mm and 3.5mm antenna tubes.
I'd recommend printing with a higher temp material than what PLA offers. With the VTX being mounted to it, it's going to get pretty hot. I printed mine in ASA.