92 modeli
For parts like the nacelles just mirror the parts in your slicer to get both sides. Hardware used: -Matek H743 Wlite -Matek m8n gps -Iflight Xing2 1806 2500kv motors -Corona DS939MG servos on tilt, Racestar DS5601MG servo on elevator…
Printable Replacement Motor Mounts for the Heewing Ranger T1. Credit to @AlexSalut. These are really nicely designed replacements for the stock motor mounts that will allow some larger motors. I'm using T-Motor F1507s in the attached…
NEW AND BETTER DESIGN https://www.printables.com/model/649545-heewing-t1-vtol-for-gdw425mg-servo-and-emax-2210-m vtol parts for the ranger. designed specifically for emax es08maii servos. printed in petg recommend to print nacelles nose…
This is a replacement for the original T1 Ranger VTOL/FW top latch that I found to be quite fragile and easily broke after only a few actuations. This latch functions in an identical manner to the original with it being securely held in…
plate with holes for mounting fc in airplace
This is an accessory part for the Heewing Ranger T1. This model should protect the control horns and servo linkages during belly landings. I sized it to fit right up against the servo arm slot and protect most of the exposed linkage. I…
FULL CREDIT & Thank you to all the OG designers for the original designs. Great work. ALL Parts have been Remixed for my personal T1. Wanted to share my favs in one spot. Parts will be added and/or edited as the build continues. Stay…
A wall hanger for the Heewing Ranger T1. Hang your Ranger by the fuselage on the wall.
There's now a Facebook group to discuss builds, successes and problems. Come join at https://www.facebook.com/groups/vtolhangout July 18 2022 update: Added a new nacelle design that is a bit longer for better airflow beneath the prop. It…
Replacement nose for the Heewing T2 Cruza. I wanted more air for my VTX and this is what I came up with. It's a little heavier than the foam nose of course. Depending on how you plan to set it up the minimum hardware you'll need are 4 -…
Nose for Heewing T2 Cruza specifically designed for the CADDX GM3 and HEQ (WIP) 3-axis gimbals. The nose is shorter than original so new fuselage mounts are needed. I've made extensions so the original can still be mounted. A custom…
Antena is fixed with two zip ties. There are two additional paths for zip ties to ensure stronger fixation of the holder to the tail boom if needed. Printing parameters: Filamet: TPU Resolution: 0,2 Infill: 100% Supports: yes
Simple yet effective and secure tailboom antenna mount for T-antennas like the TBS Immortal T. Printed in PETG which is more flexible and durable than PLA. If you like my designs please consider donating a coffee or any amount really, I…
updated version changes: -servos changed to GDW DS 041MG -arms beefed up -motor plate has tab for zipting motor wires to. -m2 hardware for fastening nacelles halves together. Needed: m2 screw kit from amazon 2x 4x10x4 flanged bearing 2x…
When printing the nose i laid it on it's back. Uses a lot of support but it makes for a smoother looking print. I imagine someone can cutoff the cape type thing i have on the nose to make the transition to the fuse a little smoother. Up…
Requires extended camera cable - 300mm
Okay this is pretty simple, I had the hatch fly off on my ranger, luckily it was on launch. I decided that I was not overly enthused with the clip nature of the original system. I printed at .1mm height. I used organic supports to support…
Here is another nose for the T2. This one is for the HEQ G-Port gimbal. This is the Walksnail version. I did include STEP and Fusion360 files if someone wants to change it for the DJI version. I went back and forth on an underslung mount…
Basic way to hang a Heewing T1 Ranger on a wall, rests on the horizontal stabilizer, and uses a Command strip to attach securely to the wall without any damage. Included in the photos is the intended strip. Recommend printing at higher…
Heewing Ranger T1 Rear Outlet for better airflow
Three variants for T-antenna mounts for the Heewing T2. One for the boom and for glueing to the side behind the wing. I made one variant to sit higher up so it can fit inside the Heewing T2 carrying case. The two foam mounts can probably…
Modified the part to fit the walksnail avatar hd camera.
Mount for DJI o3 Camera. Needs four M2 Brass Inserts. Base Plate gets glued into the plane.
This is a direct replacement front hatch clip for the T1. Features: Can be used to check CG like the original Light weight and Aerodynamic Note: The back plate is not included—and not required. In my experience with this and the original,…
grill for cool ventilation (get it?) i hot glued it in.
[edit] I have added a V2 which is lighter, but more importantly, allows a lot more breathability on the bottom, where the Air Unit gets hottest. I will be added a vent just below this spot (in the belly camera mount position) to bring…
Made two mount plates, one flat and one with slots for landing skids/wheels. The landing legs have 2.5mm hole which I tap to M3 thread and use a M3x8mm screw. A rubber band is used to angle the skids up ~15 degrees during flight. The rear…
I made these models to replace the plywood parts that come with the HeeWing T2. The VTX fan mount uses M2x12 screws to mount it together with a Walksnail VTX for a nice and sturdy package. The battery plate is made for 4S2P li-ion…
i recommend umagrip or similar for securing the battery along with a velcro strap.
This tray holds an F411-WTE (the replacement for the WSE, since the mpu6000 is no more) with mounts for the rails in the fuselage of a HeeWing t1 Ranger. Mine is mounted as far back in the plane as possible, which allowed me to also fit a…
Fits the full DJI original camera and the O3 camera. May fit other cameras too. This was designed for the T1 but it fits the T2 perfectly too. Just a simple design for a front vent cover pan servo mount. The pan servo screws into the…
Slight tweak to the great work by aviphysics. After my first rough landing with the original, I wanted retaining screws for the rear hatch. Just sink some nylon standoff into the foam with hot glue and you have a very sturdy,…
This plate mounts to the wood rails in the plane with slots for velcro straps. Dead simple, just print. Fits on any bed, needs no supports, etc.
Adding these skis let you do takeoff and landings in the T1 on snow. Use the large skis for loose snow, and the standard skis for harder, packed snow. The tail ski is optional but will help raise the tail on landing so the horizontal stab…
I printed mine with it standing on end as you can see in the pics. It printed good for me in this orientation and looks clean. The template is so you can mark and punch holes in the bottom of the fuselage so you can take the VTX in and…
trim down the stock clip. blob some hot glue in the hole and assembly onto the plane.
This simple panning camera mount is designed to require no foam-cutting whatsoever in its installation for those of us that don't want to be committed to a camera setup. Simply install the servo into the cover, and glue the bottom of the…
tray for gps/compass to keep approx parallel with fc. trim foam as needed. hot glue to hold in place.
Replacement frotnt hatch with cooling and and secure mount of an antenna. Fits the hatches on Heewing T1 and T2. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
Turnable tail wheel for Heewing T2. The original landinggear is good but I missed a turnable tail wheel as well as a better way to quickly attach and detach the landinggear. Also mount knobs for quick assembly of landing gear without…
Designed to nestle into the crooks at the far left and right sides of the wings. Uses two Small-size command strips for wall mounting, one for each side. Prints in the provided orientation (flat wall-mount side facing down). Minimal…
This is for the HDZero Micro sized camera. There are quite a few different pan setups out there for the ranger but all seem quite bulky and large so I designed this light weight and compact system. The prints are out of PETG and the belt…
just a decent wall mount for the heewing t1 ranger without landing gear.
The T-1 Ranger, albeit an excellent FPV plane, is built like a sealed oyster with very few places for air to escape. This causes two problems: 1. Hot air accumulates inside of the cabin which prevents the VTX from cooling down properly as…
Tire cap for the Heewing T1 Ranger's foam tires. Adds a little protection without costing too much weight. I glued them onto the foam tire, but they hold pretty well just with the elasticity of the TPU. Print Settings Printer Brand: Prusa…
A bigger and better battery mount (Heewing T2) with holes compatible for mounting the accessory mount (for example landing gear). I apply some hot glue to increase friction for a better secure battery mount. If you like my designs please…
Glue on with a strong glue like E6000 in place of the stock front and rear vents. You'll need an M4 bolt and nut for the mount. The Insta360 Go 2 mount is pretty tight. May be worth slightly upscaling it. Peanut mount is pretty good…but…
T1 VTOL Rear Motor Mount V1 tail top 12x12mm
I didn't really need it but figured it would be fun so I designed a drop release for the T2. The proof of concept with bent wire and 9g servo successfully released 3kg weight without much problem which equals a weight of 6kg which is more…
This is a multi-part remix with new additions of other FC Mounts. This should fit into the HeeWing Ranger T1 Nicely and mount the buzzer/USB board nicely behind the FC. I am still wanting to test fit with the PDB and will do that soon, i…
I printed mine at .1mm and put the cover on its back. I used 3mm heat sets for holding the cover on with some 3x4mm cap srews. Thanks and suggestions are welcome!
A battery holder for the Heewing F01 or other similar wooden rc structures.
I remixed the awesome design from zinets and created a PCB. With the PCB the soldering of the wires to the XT30 Pins and the 1.27mm Pin header is easier. For the plane four PCB's are need. Please make sure that the wiring matches when…
Remixed JUSS10's landing skis to fit a Heewing T2. Two sizes of skis, one having 180% larger surface area. Added two variants of tail skids, one locked in place on the landing gear rear wire. Changed the tube mount with a quick use M3…
Made a mount for the Vifly Strobe for the tailboom. Print in pale half-translucent white PLA. I find that neutral colored PLA often works very well. If you like my designs please consider donating a coffee or any amount really, I…
A replacement for the original front hatch. Doesn't require any tools except some CA-glue to hold the fin and small filament. Print in PETG, low infill ok but use >5 perimeters for good and longer lasting snap lock. If you like my designs…
Needed a wall mount and designed one that clips onto the tail boom. Printed in two parts which can be glued together. Two parts are needed so it is as strong as possible with minimal infill and parameters. Printed in 0.25 and 15% infill…
Designed this mount to easily snap mount the walksnail vtx into the nose of the Heewing T2. Printed in PLA which works OK as long as a fan is installed in the nose of the T2. For other fan-less builds I recommend using PETG. The parts is…
This mod places a ¼" screw mount precisely above the aircraft CG point and reinforces the top panel sufficiently to support the weight of an average GoPro or 360 camera. Here is a link to my test flight with this mount and an Insta360 X2.…
Fits the Flywoo decased GoPro 10 (not the latest bigger one but the previous generation). Some rework maybe needed to fit the new one, feel free to remix. There is an insert for a 270° pan servo from AtomRC (or any similar servo), holes…
Materials you'll need 4 - M2.5X3.5X3 heat inserts. 2 for each tray. 4 - M2.5X6 countersunk screws. I used ASA filamet for mine. I think any higher temp filament should be fine. You'll have to cut out some foam in the wings to glue these…
This is an enclosure for the Matek M8Q-5883 GPS module Simple enough.
A pole to move a Matek M10Q-5883 GNSS/compass away from interferences Install in the rear gps compartment of the Heewing T2 Cruza Designed in two part so that the pole can be unscrewed for transport Print with some support You will need…
My friend and I both bought HeeWing T1 Rangers. Even after multiple flights of experimenting with CG and trim, the plane tends to climb aggressively with high throttle and nose dives off throttle (assuming trimmed for level flight at 50%…
Hi, I designed a DJI o4 camera mount, based on the given dummy. The camera has to be slided into the mount, with the cable being on the upper side. Inside of the mount there are clips, gripping into the lens. My recommondation is to print…
Hi all! Here is my remix of another design posted here on Thingiverse. Made the mount compatible with the DJI O4 Pro, which bolts on the rear, and a 5V fan bolted on the front. The C20T gimbal sets as previously designed, with an airspeed…
Fuselage is a consumable. I cannot imagine remaking it every time I break my plane, so I've created this conversion. You only need to cut of original camera mount, bit more inside (everything shown on the photos) and a separator under…
See the image for the shape and size of the flap linkage.
Some different designs for use with the heewing T1 Twin model plane Category: R/C Vehicles
Battery tray for the new Heewing T-1.. print 2 for an 80mm tray that spans the length of the fuse from the spar foward. holes are 20mm spaced Category: Vehicles
TBS Unify Pro32 DP or HV VTX mount designed to fit in front of the Heewing T1 ranger. My goal was to have the antenna in line with the borders of the front air inlet. You need to cut out the foam inside the air inlet to get a better air…
Mount your O4 Lite Camera with an aerodynamic nose. It is also particularly helpful if you need some more weight in the front to balance the F-01. Note that for this mount you absolutely need a longer MIPI cable than what the O4 Lite…
This is a tray that holds the BN-880 GPS and allows the wiring to drop down through either side. I had seen a couple of other designs that required gluing into the fuselage, but my FC is mounted under the spot where this fits, so I needed…
Hi, As the title says: This is a Mount for the Speedybee F405 on the Heewing F01. You can use the original screws from Heewing, but will have to use longer M2 screws for the standoffs. M2x8 should be fine. Have a nice one.
upper part is compatible with my mounts for atomrc swordfish and volantex phoenix 2000 v2 8(!) 5x5x(≤5) magnets needed, they should be as strong as possible press magnets inside pockets (mind correct polarity for assembly) clip antenna…
Needed replacement fuselage mount strips and battery plate after a crash. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
These two models allow mounting the O4 Lite camera and VTX to the Heewing F-01. The mount for the VTX includes an antenna mount as well, which corresponds to the pre-scored antenna cutouts of the F-01's foam canopy. Notes on installation…
I printed it in TPU 100% infill, organic supports
I needed to cool down my DJI O3 air unit, someone on FB had the idea,was suggested a 20x20mm fan, so, I bought a 20x20x6mm fan, but the mounting hole is 16x16mm. Thinking that the fan I bought is 20x20mm mounting hole…. sigh. Print fits…
I designed this vtx cooler after having experienced vtx getting too hot while waiting for GPS-lock and doing pre-flight checks. It uses two 14x14 heatsinks usually sold for Raspberry Pi. Just push in place should be sufficient. It also…
Hi, Maybe you can use it for your modeling or just because you lost the original one: this is a model of the camera dummy from the Heewing F01. Fits perfectly.
Hi, I edited the given cap and made a good printable version. youll have to insert the antenna protector first and insert the o4. I cut a bit of the elapor to have the usb-c port accessible. Also the camera needs a small cut, if youre…
Made this for a M2x25 as knurled heads in that dimension are close to impossible to find. They are used for the fin on the Heewing T1 Ranger. Print in 0.1 or 0.15. Use a 0.5mm metal wire to lock slotted head in place. If you like my…
Hi, Just combined these two models.
I prefer the shorter tail boom and more compact size of the original T1. However, to use the new quick-release horizontal and vertical stabilizer, the longer T1-S tail boom is required. The same applies when converting a PNP version to a…
Heewing T2 Cruza – Cooling Air Vents Description: The Heewing T2 Cruza has barely any airflow through the fuselage, which can cause heat buildup around the ESC, battery and FPV gear. These air vents fix that. Each vent slides into the…
Wall mount for the Heewing T1-S mounted with a single 4mm screw. I use it on an original T1 with a T1-S tail mod. Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A…
Heewing T2 Cruza Nose for Walksnail VTX – 9g Pan Servo, Pitot Tube Mount & VTX Switch A replacement nose for the Heewing T2 Cruza, made for a Walksnail VTX and a pan-controlled camera. Features Mount for a 9g servo to pan the camera 4 mm…
This is a direct replacement front hatch clip for the T1. Features: Can be used to check CG like the original Light weight and Aerodynamic Note: The back plate is not included—and not required. In my experience with this and the original,…
Fuselage is a consumable. I cannot imagine remaking it every time I break my plane, so I've created this conversion. You only need to cut of original camera mount, bit more inside (everything shown on the photos) and a separator under…
Hi all! Here is my remix of another design posted here on Thingiverse. Made the mount compatible with the DJI O4 Pro, which bolts on the rear, and a 5V fan bolted on the front. The C20T gimbal sets as previously designed, with an airspeed…
I made these models to replace the plywood parts that come with the HeeWing T2. The VTX fan mount uses M2x12 screws to mount it together with a Walksnail VTX for a nice and sturdy package. The battery plate is made for 4S2P li-ion…
