Heewing T2 Landing Skis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesigned all parts to fit the Heewing T2. Added 180% larger (as big as would fit on the printbed. WORK IN PROGRESS
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 469
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed JUSS10's landing skis to fit a Heewing T2. Two sizes of skis, one having 180% larger surface area.
Added two variants of tail skids, one locked in place on the landing gear rear wire. Changed the tube mount with a quick use M3 knob and M3 nut. And the second variant turns with the rudder. To do this the rotating hub in the tail is replaced with a longer hub with mount on the bottom. A holemust be drilled . The steerable variant must drilled through the bottom half of the tail. Once mounted the top of the hub might need be sanded sludge to get the fin to lock in place. See pictures.
Also mount knobs for quick assembly of landing gear without tools. Use M3 with hex or slotted head. Slotted heads can be locked in place by using a small 1mm wire. If the screw is too long I use a small spacer I tap with M3 thread.
Also included parts that help keep the legs in correct position.
Hardware needed:
- Heewing T2 landing gear kit: https://www.heewing.com/products/t2-landing-gear-set
- Small drilling screws (those that comes to mount micro servos works good)
- Rubber bands / hair bands
- M3 screws and nuts