Heewing Ranger T1 Motor Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable replacement motor mounts for the Heewing Ranger T1. Credit to @AlexSalut.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 424
- Wydruki
- 0
- Wyświetlenia
- 1798
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Printable Replacement Motor Mounts for the Heewing Ranger T1.
Credit to @AlexSalut.
These are really nicely designed replacements for the stock motor mounts that will allow some larger motors. I'm using T-Motor F1507s in the attached pics. I didn't see these mounts online anywhere so I'm uploading them for others. You need to mirror parts 1 and 2 in your slicer to make the left side mount.
Part 1 - This is the main body for the mount that is attached to the wing. I printed mine in ABS, and a friend did his in TPU, and both worked. I found with ABS I could not pull it off after installing it without breaking the part. The right side is provided. Mirror this part in your slicer to make the left side part.
Part 2 - Two versions of this part are provided. One for bottom-facing motor wires and the other for top-facing motor wires. This needs to be a strong material that can take your motor mounting screws. The right side is provided. Mirror this part in your slicer to make the left side part.
Part 3 - This is a screw spacer. Make sure to install these in the screw holes prior to installing part 1. You need 2 of these for each mount.
Additional parts required per mount are:
- 2 x M2x15 screws
- 2 x M2 Hex Nuts
- 4 x M2x8 Self Taping screws