Heewing Ranger T1 Motor Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable replacement motor mounts for the Heewing Ranger T1. Credit to @AlexSalut.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 424
- Makes
- 0
- Views
- 1,798
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
Printable Replacement Motor Mounts for the Heewing Ranger T1.
Credit to @AlexSalut.
These are really nicely designed replacements for the stock motor mounts that will allow some larger motors. I'm using T-Motor F1507s in the attached pics. I didn't see these mounts online anywhere so I'm uploading them for others. You need to mirror parts 1 and 2 in your slicer to make the left side mount.
Part 1 - This is the main body for the mount that is attached to the wing. I printed mine in ABS, and a friend did his in TPU, and both worked. I found with ABS I could not pull it off after installing it without breaking the part. The right side is provided. Mirror this part in your slicer to make the left side part.
Part 2 - Two versions of this part are provided. One for bottom-facing motor wires and the other for top-facing motor wires. This needs to be a strong material that can take your motor mounting screws. The right side is provided. Mirror this part in your slicer to make the left side part.
Part 3 - This is a screw spacer. Make sure to install these in the screw holes prior to installing part 1. You need 2 of these for each mount.
Additional parts required per mount are:
- 2 x M2x15 screws
- 2 x M2 Hex Nuts
- 4 x M2x8 Self Taping screws