Heewing T2 Nose for Caddx GM3 Gimbal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement nose for the Heewing T2 utilizing the new Caddx GM3 Gimbal. STEP and Fusion360 files included.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 157
- Wydruki
- 0
- Wyświetlenia
- 1081
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
When printing the nose i laid it on it's back. Uses a lot of support but it makes for a smoother looking print. I imagine someone can cutoff the cape type thing i have on the nose to make the transition to the fuse a little smoother. Up to you. I did include STEP and Fusion360 files so you can make it work best for your setup.
I used 2 walls and 4 top and 4 bottom layers.
Use a higher temp material like ASA, PC, PPCF, Etc. It'll last longer in the summer heat. But i imagine if you keep it out of the sun and get it flying quickly you might be alright with PLA.
The one thing youll have to either adjust for your T2 is the mounting tabs. or drill a new hole in the plywood to use it as is.