Heewing T1 Ranger Hatch/Cover Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement HeeWing T1 Ranger front hatch clip
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a direct replacement front hatch clip for the T1.
Features:
Can be used to check CG like the original
Light weight and Aerodynamic
Note: The back plate is not included—and not required. In my experience with this and the original, the clip fits securely into the hatch without it. Simply press the clip after you install the hatch, and you’ll feel a satisfying snap as it locks into place.
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee.
Filament / Print instructions: PLA - 100% infill, Use tree supports.
Change Log:
Rev 01: The clip is now a bit tighter around the carbon rod, and the handle is lowered.
To help maintain the clip’s tight fit over time, it is recommended to store the aircraft with the clip detached from the carbon rod or print a seperate one for storage.
Rev 02: Reinforced handle - wider by 1mm.