Heewing T1 HD VTX Cooler (for pre-flight with video)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added heatsink to be avoid HD VTX overheating while in pre-flight waiting for GPS-lock and doing checklist etc.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this vtx cooler after having experienced vtx getting too hot while waiting for GPS-lock and doing pre-flight checks.
It uses two 14x14 heatsinks usually sold for Raspberry Pi. Just push in place should be sufficient. It also has holes for filament that goes into the VTX holes on Walksnail VTx but that is likely not needed.
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
