Walksnail moonlight Heewing T1 ranger mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This kit lets you install Walksnail moonlight kit in Heewing T1 Ranger with least possible cuts in the fuselage.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v3.0
Fuselage is a consumable. I cannot imagine remaking it every time I break my plane, so I've created this conversion.
You only need to cut of original camera mount, bit more inside (everything shown on the photos) and a separator under small front hatch.
I also recommend to cut a bit of antenna stick. I've shortened it by 5mm to make installation easier. UFL cable simply gets longer .
I used PETG, but if possible, use ASA for better thermal resistance.
I recommend to print with 2 top, bottom and side walls, and with 15% infill. I've used cross-hatch infill pattern.
BOM:
4x M2x4 screw for VTX-spider mount
2x M2x5 screw for camera mount
1x M3x16 down to x10 for connection between spider and top cover with camera mount
1x M3 nut to be pushed into the spider