Heewing T2 Drop Release (WIP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drop release using the accessory mount for Heewing T2. WORK IN PROGRESS
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 420
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't really need it but figured it would be fun so I designed a drop release for the T2. The proof of concept with bent wire and 9g servo successfully released 3kg weight without much problem which equals a weight of 6kg which is more than I think anyone will need to lift. :)
The design uses a 9g servo and a cut 35mm key chain ring. The servo is mounted on the bottom of the fuselage behind the battery and moves the ring through the fuse into a custom accessory mount. The one I use is for landing gear but can of course be used without that interface.
If you don't have a 35mm key chain ring to cut you can use the wire shaper STL and bend your own, however I recommend using a key chain ring.
Video wire mechanism: https://streamable.com/pg7jms
Video test drop: https://streamable.com/219enp
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
