Liczymy pasujące modele…
This is a quick 3D model of the DS5160ssg 60Kg Digital Servo. It's purpose is to help you design servo brackets and other parts that require a big 60kg servo. * Just import this model into your 3D design software and now you have an…
Stand to mount a Thermaltake PR22-D5 reservoir/pump combo to a 140mm fan (or fan mount). The long axis of the reservoir is offset horizontally from the axis of the mount points, this being designed for mounting to the bottom fans of my…
Upate 2024-10-13: Replaced stl with 3mf Added an additional V2 with holes for improved gluing Updated images accordingly A minimalist servo frame for the X06H servo from KST. The frame is glued directly into the wing and the servo is then…
Small mod to Samgo's terrific servo cover holder to fit the Corona 929MG servo
Another version of Servo Mount for Lego Train Switch. The others simple do not suit me well. All parts are printable, you will only need SG90 9g micro servo with a small screw (usually part of servo) and sure, the original lego switch…
Simple Holder for Servo motor. Can be attached with M3 srews. Takes about 20 min. to print Weight is around 2g PRINT Best Orientation: Material: PET-G Infill: at least 25% Brim: NO Layer height: 0.2 or 0.15 Supports: Well, I printed…
One of the parts required for wltoys RWD conversion. Enjoy and left a comment if any improvements are needed. Also don't forget to visit my channel to get the latest updates:…
pico multi color unit with 996 servo mount for elegoo neptune 4 uses the same screw holes as the spool holder, I used 2x m4x20 screws
Joint de bouchon de réservoir Mottaz qui équipés les motoconfort des années 50. a imprimer en TPU95.
Kann ohne weiteres Zubehör montiert werden, Originalschraube ist lang genug.
This model is designed for Dukedoks chassis 1/10 servo arm its radius 3mm you can do it with m3 10mm
Beta 1400V2/V1 Krytky serv / Beta 1400 V2/V1 Servo Tray Category: DIY
4/23/2026: UPDATED I made a new version that is much stronger and correctly lines as if it were in the original mount. This also works for the XTS-S10 Rally Car, and I assume the upcoming Short Course Truck. I wanted to get rid of the…
These are servo mounts designed to fit the Vanquish Phoenix crawler when using an AGFRC B26CLM servo. Printing: - Back mount requires supports (included in .3mf; please see the screenshot for reference). - Use 4+ walls and 100% infill for…
Servo saver for HSP MTH-12. I was fixing model for someone and couldn't find that part so had to create it ;)
My Craftsman electric pressure washer was missing a cap or plug for the detergent reservoir, so I made one. It has a groove for an o-ring (size G20, 19.4mm ID, 3mm thick). The OD of the plug itself is 1.125". Also works great as a generic…
v.PC – Alphacool Core 200 Reservoir Mount for the Voron inspried PC This is an add-on part for my Voron-inspired PC case project: v.PC - Voron inspired PC Case It is designed only for the Alphacool Core 200 reservoir and I cannot…
Mg90d servo https://share.google/E6KvHXBPQiiqf0F3B Laser pointer https://share.google/aNgYr9M2GAukybvdS The laser must be supported by paper so that it holds and does not fall out. both servos can rotate 270 degrees
Esta pieza corresponde a la base pequeña donde se monta el servomotor encargado de accionar el mecanismo de párpados del animatrónico. Su diseño tipo “caja abierta” permite alojar el micro servomotor con precisión, asegurando una fijación…
La base grande para servomotor es un soporte estructural diseñado para alojar un micro servo en una posición elevada dentro del mecanismo del animatrónico. Su altura adicional permite colocar el servo por encima del nivel del conjunto…
Este soporte central es una pieza estructural clave dentro del mecanismo ocular del animatrónico. En su sección media integra dos orejetas paralelas que funcionan como punto de pivote para la rotación del conjunto de ojos, permitiendo el…
Esta pieza actúa como la base estructural del mecanismo de cejas , alojando y alineando los dos servomotores responsables del movimiento sincronizado de ambas cejas. Su diseño integra cavidades precisas para un montaje firme, evitando…
I broke the original one and couldn't buy it separately so i designed one. You will have to drill the holes after printing .
Beschreibung (Deutsch) Dieser vollautomatisierte 100mm Absperrschieber ist eine High-End-Lösung für Werkstatt-Absaugsysteme. Er kombiniert das bewährte Prinzip des Truncated Ball Valve mit einer stabilen Servo-Direktmontage und moderner…
A Simple Servo Mount - there are lots of this This one fits the way I needed it to
Hi, This is a model of a stand/pedestal for a 5‑liter water reservoir. It consists of a base and three feet connected by dovetails. Included are three types of bases and two types of feet (70 mm and 90 mm height). Base types: A variant…
This mechanism converts the rotational motion of a servo motor into linear motion using a rack and pinion gear system. Designed for hobby robotics, makers, and students 1. Gear Specifications A. The Pinion (Motor Gear) Standard: Spur Gear…
Klipper config [gcode_macro BRUSH_OUT] #Debug Deploy Arm gcode: SET_SERVO SERVO=NozzleBrush ANGLE=180 #normally 90 should be enough but for me it is really rectangular with 100 [gcode_macro BRUSH_IN] #Debug Retract Arm gcode: SET_SERVO…
An adapter block to use the Injora INJS2065 servo on WPL C14 RC Cars, https://www.wpl-rc.com/products/17g-dpg-servo
Features a simple installation and plug & play design — only the original stock screw is required. For improved durability and long service life, the part is recommended to be printed from a rigid material.
This is a custom-designed scanning mount for the HC-SR04 Ultrasonic Distance Sensor , specifically engineered for obstacle-avoiding robots and Arduino projects. The design consists of two parts: Servo Base: A cylindrical housing designed…
I accidentally bent the two side screw holes apart when trying to add tension to the servo. I thickened the sides a bit to keep this from happening. Low Rider MMU by GcodeGearHead
the 25 tooth servo arm for 6x6 file I printed one out of PlA and so far it is holding up. I expext it to break soon so I printed a polycarbonat one as a replacement. just as side note I had a hard time geting the polycarbonat (PC) to…
1, 2, 3, 4, 6, 8 & 16 servo arms attachment kit. Universal for microcontrollers servo's; 1, 2, 3, 4, 6, 8 & 16 2cm servo arms // 4.86mm holes 1, 2, 3, 4, 6, 8 & 16 2,3cm servo arms // 4.86mm holes 1, 2, 3, 4, 6, 8 & 16 3cm servo arms //…
A compact, 3D-printable module that automates pressing the valve on a spray bottle using a servo motor. Key Features: Universal Design: Works with most standard freshener bottles. Easy to Print & Assemble Fully Controllable: Use an…
Multiple simple servo modules/holders/boxes that are compatible with other Robotiv League components.
Modified carriage for servo cutter using BootyCallJones X-rail mod. Works with stock toolhead board, EBB42 Gen2, MicroSwiss FlowTec and stock part fan ... no chain ! Extruder is for 4mm tube or ECAS04, seperate entry for 5th gate (in my…
Halter zum einklevben in Tragflächen für Servos HV08, gedruckt aus PETG-CF mit 0,4er Düse und 0,16 Schicht, massiv
Drone release mechanism for a small Emax ES08MD II servo. Can be mounted by straps or zip ties, using holes. The recommended servo is Emax ES08MD II. 2 mm screw can be used to further secure the cylinder on the servo. A key ring and a…
Halter für ein Servo zum öffnen des Deckels. Es werden 2 benötigt. Für die andere Seite einfach Spiegeln. Längsseite des Plexiglas muss noch ein L_Aluwinkel montiert werden zur versteifung. (2 von den 20kg Servos sind fast zu schwach)
Quick whip together for a gentleman on one of my car 3D printing pages. Coolant res cap with insert and gasket. Use chem resistant for body and insert and tpu or the like for the gasket or cut one out of silicone. Print setting are on…
I had a servo lying around in my electronics projects container and wanted to have a good organizing bin for this servo, a controller I have, and any servos I may use in the future, so I made this bin. It is a 2x3x6u gridfinity bin that…
This model lets you customize your Nespresso Essenza Plus Reservoir Sleeve while still seeing the water level. It does not require supports. I used an ice blue PLA filament, but anything will do.
set servo angle at 90 degrees put pulley on servo with belt holder facing down put belt in and test length with shaft/rod in bearing, adjust length as needed adjust shaft as needed (4 line if you want original angles or at release angle…
Universal servo mount v2 mini bundle for RC builds. Includes 5g and 9g variants only.
Ersatzteil von REELY RC sind immer seltener, daher dieser Nachbau. Die Gleitlager des Originals passen und können wiederverwendet werden. Unter umständen kann es je nach Drucker und Filament zu Ungenauigkeiten kommen.
My Creality Ender 3 v3 Core XZ printer had a problem and I notice that it happens because of one of Servo Motor connector loosing. Then I designed this part and solve it.
I'm too cheap to keep buying parts, so I made this.I use the previous savers spring and tension piece
Add some personality to your plant care with this 3D-printed duck reservoir! Designed to fit most standard 3D-printable watering spikes, this duck uses a standard PCO 1881 (PET bottle) thread. Instead of a hollow shell, this model is…
Basic servo arm/horn that I remixed in a few minutes for all of your dual-armed needs! Surprised that there wasn't a model like this already considering how easy it was for me to make, but hey, there is now one of these ready for your…
Servo controller to control a servo in two positions. Input is via 5V for servo power and 5-12V signal to position the servo. When signal is present, servo moves to 0 degree position, when signal power is removed, servo returns to preset…
a DIY maker project supporting from 1 to 32 servo motors to physically strike the keys of any instrument, controlled by an ESP32 + PCA9685. The frame mounts on M4 threaded rod rails with printed PLA brackets, arranging servos to match the…
Hello, hope this helps someone else stuck in the same position. I created this dual sided servo arm, which is designed to fit inside the DKS chassis since I did not have one readily available. This should work with most standard 40x20mm…
Custom designed cover for the MKS SERVO42C NEMA17 closed loop controller. The original controller board has a 90° exit for the breakout board connector which sometimes leads to a collision with other parts. This cover fits the controller…
Brake master cylinder reservoir cap for the Jeep Wrangler JK model. Used in conjunction with a pressure brake bleeder to make the job easy. Center hole is sized for a 1/8 NPT tap, so you can use a metal barb fitting for whatever hose you…
Requires 5.5 mm ball bearings, MG995 and SG90 servos, and a microcontroller such as an Arduino…
servo pulley for 25KG High Torque Servo Motor, Miuzei RC Steering Servo Metal Gear Waterproof Compatible with 1/8, 1/10 RC Car, with 25T Horn 180 Degree 22mm wide 2mm thick rim top and bottom, 2mm tall 20mm string wrapping area in the…
It's made for a Yahboom RPi Pico Car, to hold two MG90 small servo motors. No nuts required for the servos, because it will carve itself into then motors. You need to pop out the ribbets and replace them with nuts and bolts. Part list:…
This model uses a 180 degree mg90s servo and will work with or without gantry backers on a Voron 2.4 or Trident. If setup correctly, there will be virtually no strain on the servo. You will need the following: m3x6 x1 m3x8 x1 m2x8…
I found a few already online and I found that they sucked so I made one that works slick and is really stout. This adapter allows a full size steering servo to be used on the Rlaarlo Omni Terminator Truck and XTS S10 Rally Car.
It is not a fully tight fit, semi loose, but holdes well enough to not drop when held upside down, needs screw/glue to keep it in place. For the mg995 servo
This is a housing for a 20kg servo motor. It has a slot for a wire on each side, as well as mounting tabs for wood screws. It will fit a #10 wood screw, which I think is about a M5 wood screw if you are elsewhere in the world. The…
These water vapor spraying machines are great for gardening, however the part that connect the water reservoir (bottle) to the machine has a design flaw that allows you to overtighten the bottle and crack the plastic. Since the machine…
An automatic trash can that supports an ultrasonic sensor and a space for a mg90s servo.
This is a storage tray designed for the Philips LatteGo 5400 model (may fit other models but not tested). The tray sits on top of the bean storage container. Has handles on the sides for an easy way to lift off when needed to access the…
These plugs are designed for the Philips LatteGo 5400 coffee machine. The bean reservoir has holes in the corners of the reservoir and the hopper itself has a hole in the center of it that when the whole reservoir is filled with coffee…
Thanks to charetejohn for starting the design. I took that original design and extended the servo retaining mount so I could hold it in place with screws. I also added holes for screwing it down to the wing. Works perfect with Hextronics…
The objective of this design was to create a minimal-cost valve for lab-scale or small scale irrigation systems where water has to be diverted to many individual outlets. It uses a cheap (~2EUR) Kuman KY66 mini servo to drive the…
25/02/2026 - It's been 4 years, but I've finally removed the rogue part from the underside of the model and updated the page. Apologies to anyone affected. Upgraded version of my original water reservoir cover for the Gaggia Classic Pro .…
This is a quick 3D model of the DS5160ssg 60Kg Digital Servo. It's purpose is to help you design servo brackets and other parts that require a big 60kg servo. * Just import this model into your 3D design software and now you have an…
This is a 3D model of the MG996R servo. It's purpose is to help you design servo brackets and other parts that require a standard sized servo. * Just import this model into your 3D design software and now you have an accurate…
Revised to replace stock servo horn for the Team Associated T3. This should work for other applications. The length center to center is 15.5mm. There are two versions one without added bracing and one with. These are fairly stout so both…
Allows you to look around like a DJI and simply enjoy the view. Best addition to this drone I've made by far. It's a rear mounted camera with servo tilt control. Fits the OEM Cat and other similar size cameras. Requires a 9g servo and…
Allows flexibility on where the reservoir is vertically installed. The bracket can be mounted onto a 120 mm spacing fan or radiator. Print with supports for the large overhang.
This dock fits on the Voron 0 z-axis extrusion. Dock is horizontal at 80 degrees. BOM: 1x MG90S micro servo 2x M3x6 BHCS (One must be a steel bolt for magnetic reason) 1x M3x8 BHCS 2x M3 nut 2x M2x10 self-tapping screw
I designed these 5 components for the 5 gallon bucket I used as a water reservoir for my K40 laser. I wanted a way to get a good seal so the dust form other tools such as my CNC router do not contaminate the water. The holes for the water…
Reservoir Holder that can hold 4 quarter reservoirs made by Beckman. Should fit on any standard SBS nest, such as Hamilton, Tecan, Bravo, etc. From a 96 format labware definition, aspirate/dispense from columns 2, 5,8, and 11. Print…
This is remix from pruzkumakkoubahadr's design "Landy ARB front bumper", allowing to mount 3dsets winch & servo guard
Provides a clean exit and relief for servo wires in the wings of the Nexa Zero
Accidentally ordered a servo motor that was bigger than the one that the stock OpenRC F1 holder is designed for. Instead of ordering more servos, I designed a new holder! Fits my servo perfectly, not sure about all servos of this size…
## New changes in Version2 (this version) VS version1 (Version 1 https://www.printables.com/model/971423-ercf-v2-selector-mod-for-larger-28mm-17g-servo * In version1 servo arm cannot touch the filament block top hat to release brake. The…
A multi-material utilizing model to make Fai D. Fluorite's staff from CLAMP's Tsubasa: Reservoir Chronicle series. CenterCrystal x 1 StaffCenter1 x 1 StaffCenter2 x 1 StaffWingA x 4 (mirror 2) StaffWingB x 4 (mirror 2) StaffWingC x 4…
It's a bit light and falls over, this holds it in place :) Print Settings Printer Brand: Bambulabs Printer: Bambu P1S **Rafts:** No Supports: No Category: Electronics
Replacement cap for the brake/clutch system on the 4G Mitsubishi Eclipse 06-12. Mitsubishi OEM Part number is 4625A161. Apparently this will fit the Galant of the same generation. May also fit other brands/models so it may work for you…
Upate 2024-10-13: Replaced stl with 3mf Added an additional V2 with holes for improved gluing Updated images accordingly A minimalist servo frame for the X06H servo from KST. The frame is glued directly into the wing and the servo is then…
I had some ProModeler DS100DLHV micro servos laying around and wanted to use them in my Mini Crosswind. The servo trays are slightly bigger than the original so you will need to trim some foam to use them. They're 1mm wider and 5mm longer…
Servo Adaptor Plate to install the KingMax KM1203MD 10kg Servo's of only 20 grams per piece, to be used for the elevators, rudder and ailerons, for the flaps I chose the KST CM653 40 gram servo, saving in total 235 grams of unnecessary…
Based on the idea of this project http://www.thingiverse.com/thing:1219371 I've created a working one to fit the servos in the wing while looking good. It's designed for a 26x26mm servo (an hobbyking HK15148B in my test): just cut a bit…
Ball mount adapter for motorcycle brake reservoir Print settings Material: tested with PAHT-CF, propably ASA would be enough Infill: 30-50% Supports: yes Raft: yes
COBOT: Four servo legs and distance sensor robot I present my latest project, COBOT, a robot that can move thanks to 4 servo motors and get the distance to obstacles with the HC-SR04 distance sensor. This is an ongoing project I have made…
Washer reservoir plug prepared for the Subaru Forester SF. The plugs should also fit the reservoirs of the Impreza GD and other Subaru.
