Servo Tester Case - Easy Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tried the others, but they would not fit the servo tester I received. The others were not easy to print the text. So I…
- Ocena
- 5 / 5
- Polubienia
- 101
- Pobrania
- 838
- Wydruki
- 7
- Wyświetlenia
- 2874
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Tried the others, but they would not fit the servo tester I received. The others were not easy to print the text. So I made a new one that prints text mid layer (with a spool swap). Enjoy!
Screws are 2.5mm hex bolt
Category: 3D Printing
(ADDING A CAPACITOR)
I was having an issue with my servo tester not working with larger servos. Buttons would just flash and would not work. I added a 470uF capacitor to the input line. Fits perfectly in the 3D printed case. Solved all my servo issues. Works perfectly now. See Photos.