Servo automated iris / aperture for air flow controll
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I finished the project and will upload all the files and code as is.
- Ocena
- 4,857 / 5
- Polubienia
- 560
- Pobrania
- 2029
- Wydruki
- 5
- Wyświetlenia
- 18 970
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I finished the project and will upload all the files and code as is.
Servo Test (with end stop current detection) :
Finished Project : https://www.youtube.com/watch?v=DbXVjOoNJw4
Materials needed :
- 5 m3 x 5mm
- Servo FT90R (continuous rotation version of a FT,ST,SG or FG90)
This is for a learning/hobby building project to do precise temperature control in my 3D printed enclosure, while also using the (waste) heat to dry filament storage above.
The setup I'm building uses just cheap continues rotating servo's and does end stop recognition by sensing changing current draw if servo is stalling.
More details, parts and script for the (IKEA LACK) 3D printing enclosure can be found here : https://www.prusaprinters.org/prints/5141-ambient-control-pcb-brain-box.
Remix from "120mm Fan Aperture Door" by "Inertpyro", source : https://www.thingiverse.com/thing:529661
Uploaded tunnel parts for the original aperture (without servo) here : https://www.thingiverse.com/thing:3747061