1 / 9
Heewing T2 nose for GM3/HEQ Gimbal
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heewing T2 nose designed for the CADDX GM3 and HEQ 3-axis gimbals.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 962
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 6)Remiksy (0)Kolekcje (19)Powiązane
Nose for Heewing T2 Cruza specifically designed for the CADDX GM3 and HEQ (WIP) 3-axis gimbals. The nose is shorter than original so new fuselage mounts are needed. I've made extensions so the original can still be mounted.
A custom design for mounting a pitot is available but haven't been tested.
Printing in LW-PLA the nose weighs 35g with M3 nuts installed.
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6