MK4s Exterior LCD mount for Lack Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MK4s Exterior LCD mount for Lack Enclosure
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 2
- Wyświetlenia
- 290
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MK4s Exterior LCD mount for Lack Enclosure
Just a quick mounting plate to allow me to screw the MK4s LCD mount on to the front of the Lack Enclosure.
I used the exisitng screws 4x (3x12sT) which are recessed on the back side of the plate. and the front I just used 2 short #8 drywall screws
I Wanted to make use of the cable passthrough from the GEN2 Modular Drawers
Fyi the ribbon cable is 2 to 3 inches too short. So I bought the below parts to make a longer cable. This will also allow me to make proper corners and cable management of the ribbon cable.
https://www.digikey.com/en/products/detail/3m/3365-24-100/9479206
https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/9-215083-4/4486392