MK4s Exterior LCD mount for Lack Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MK4s Exterior LCD mount for Lack Enclosure
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 2
- Views
- 290
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
MK4s Exterior LCD mount for Lack Enclosure
Just a quick mounting plate to allow me to screw the MK4s LCD mount on to the front of the Lack Enclosure.
I used the exisitng screws 4x (3x12sT) which are recessed on the back side of the plate. and the front I just used 2 short #8 drywall screws
I Wanted to make use of the cable passthrough from the GEN2 Modular Drawers
Fyi the ribbon cable is 2 to 3 inches too short. So I bought the below parts to make a longer cable. This will also allow me to make proper corners and cable management of the ribbon cable.
https://www.digikey.com/en/products/detail/3m/3365-24-100/9479206
https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/9-215083-4/4486392