Phone holder / charging dock for ABC Design strollers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple phone holder and charging dock for ABC Design strollers
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 449
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple phone holder optimized for Samsung Galaxy A54 and A55 in a basic silicone case, but will also fit other similar phones (approximetly 80 mm width and 12 mm depth). This holder is intended for easy attachment to the standardised mount of ABC Design strollers.
You will need to print both the adapter and the holder itself.
The holder uses the basic great concept of Andyprint_3D's cup holder and is fully compatible with its base (adapter) - so you can alternate the cup holder and this phone holder on the same mount.
The holder is also designed like a charging dock - you can charge the battery while the phone is stored in the holder easily during your adventures :)
Printing:
- Phone holder is printible without support but you will need a few supports for adapter
- I recommend stronger material - PETG or ASA
Happy printing!