Stabilisation clips for bunny obstacle/hurdle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stabilisation clips as add-on to the model provided by @philiip11 in order to provide a bit more stability.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
This is a stabilisation clip as add-on to the model provided by @philiip11 in order to provide a bit more stability. You need at least 2 of them to connect the left and right side of the hurdle. The diameter of the holes is designed for 10 mm wood sticks / dowels. Probably, the original printed polse (11 mm) won't fit. Just send me a PN in case you need other diameters and I can upload the files for you.
Due to the geometry of the clip, I recommend to print it 45° upright, as provided in the *.3mf file and use organic supports.