Liczymy pasujące modele…
Continuing to play around with Tech Deck obstacles. My countertop is quickly turning into a skatepark. Totally unintentional, but you have to test out your prints right? Glue AngleBarforBox onto box edges Depending on your printer, the…
¡Important! The 'Chassis-v5-Lid.stl' file has been updated to fix a small issue. RoverT is a free robot project designed to help makers learn about Arduino, sensors, electronics, and robotics . The robot features: A proximity sensor for…
Demo video: https://youtu.be/JD0odpFnJGQ My latest 3D printed project is built around an electronics circuit RobotHut showed in one of his videos. It goes forward until it detects an object in front of it and then turns by switching the…
NATO APP6 symbols obstacles You have a full range of symbols that can receive 5x2mm magnets on their back to stick to ferrous surfaces. Comes with in 3 different sizes (2 biggests in the map photo) Be careful to glue the magnets with the…
“This chubby, boyish image of Ganesha seated with the soles of his feet pressed together developed in Indonesia, where he is particularly popular. Originating in India, he gained special importance across Southeast Asia and even in China…
The Interloper's Prism is a fingerboard obstacle that is made to be taken with you wherever you shred. it should fit in a small bag. Use either side as a ramp grind the center rail flow through it from side to side foam grip tape…
The game file for the obstacle walls, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
This is a simple remix of Pasquill's 15mm Belgian gate (or Obstacle Cointet or Element C) for resin printing. one version is simply assembled while another one is resized to match the correct size at 1-100. The whole model was stretched,…
The bottom circles diameter are 22mm and 13mm Tested print settings : Tested material is PETG and is very strong In the bottom part 80% infill, in the rest part 50% infill Set supports everywhere Set 5 perimeters
This is a stabilisation clip as add-on to the model provided by @philiip11 in order to provide a bit more stability. You need at least 2 of them to connect the left and right side of the hurdle. The diameter of the holes is designed for…
The bottom circles diameter are 22mm and 13mm Tested print settings : Tested material is PETG and FLEX PETG SETTINGS : In the bottom part 100% infill, in the rest part 50% infill Set 4 perimeters 0.28 layer height FLEX SETTINGS : 100%…
This is an obstacle-avoiding robot using 3 ultrasonic sensors. An obstacle-avoiding robot with three ultrasonic sensors (front, left, and right) works by detecting distances to nearby objects. When an obstacle is detected: Front sensor…
3D obstacle for game boards – lightweight, modular, various shapes, limits movement of balls or figures, easy to place.
Various deadend exports from my BeamBridge generator. Bumpers can employ magnetic balls or bearings to hold cars - dont forget to pause your print before the hole is closed… Digs are randomized to make every single one look different and…
A set of printable anti-tank obstacles with a little gothic twist. Four different levels of battle damage to mix things up. Perfect for 28mm or heroic scale wargaming. Dimensions: Height: 24mm Width: 22.8 mm / 24mm FDM friendly and…
This modular agility course is designed for small pets like gerbils, hamsters, and rats. It features a base tunnel structure and interchangeable jump obstacles that can be adjusted or removed easily. Whether you’re building a fun training…
Just build, stack, and start training. Low to the ground training for airborn Rcs. Does need supports. You can stack them as high as you want.
Prevent your robot vacuum from climbing obstacles, getting stuck, or falling from edges. This bumper guard is designed to block the vacuum from riding up on objects such as drying racks, door frames, furniture edges, or thresholds. It…
Here is a simple sphero arch obstacle to use with your sphero robots for coding practice. I added Velcro to the bottom of the feet so that it sticks to the carpet and doesn't move. Great obstacle to code through or around. Scaled at 100%…
Continuing to play around with Tech Deck obstacles. My countertop is quickly turning into a skatepark. Totally unintentional, but you have to test out your prints right? Glue AngleBarforBox onto box edges Depending on your printer, the…
For the past several years, I have helped with an annual neighborhood Halloween activity at our church. I am in charge of a carnival game room that is exclusively lit with black lights on UV reactive objects and surfaces. I wanted to add…
Design Concept This model is designed for creating a basic Arduino-controlled obstacle-avoiding vehicle. The frame provides a sturdy base for mounting components needed for building a small robotics project. Purpose The main use is in…
I just recently bought mini golf carpet and decided to create an obstacle! This is 140mm wide x 200mm long with a 35mm tall ramp (5.5"x8"x 1.4"). Works like a charm! Print Settings Printer: BambuLab A1 Rafts: Doesn't Matter Supports: No…
this is the blue print park two part mould for making your own plow ramp. to cast in cement or whatever you want
une base cotière allemande de la seconde guerre mondiale qui contient un mitrailleuse et un canon anti-aviation
24Th Scale Teeter Platform Print Strength used was 40% to make it more durable Standard PLA Plus The teeter top does need to be cut and would use connectors to allow easier assembly Slats: print as many as you like. I used 13 for the…
24th Scale simple articulation obstacle printed on an Elegoo Centauri Carbon Strength set at 40% for durability print time is a bit long at 10 hours per section. In the pictures, I printed 3 and connected them using a simple 1/2" x 4"…
¡Important! The 'Chassis-v5-Lid.stl' file has been updated to fix a small issue. RoverT is a free robot project designed to help makers learn about Arduino, sensors, electronics, and robotics . The robot features: A proximity sensor for…
Demo video: https://youtu.be/JD0odpFnJGQ My latest 3D printed project is built around an electronics circuit RobotHut showed in one of his videos. It goes forward until it detects an object in front of it and then turns by switching the…
This is an obstacle for Jiabale 1:43 rc drift cars that uses the rubber tires from the car for grip along with 12 quarters for weight. This model should be compatible with all of they're models. I would be happy to modify it for different…
Elmer is an educational robotics project designed to teach core concepts in electronics, programming, and automation. 🧠 Learn with this project: Sensor integration (ultrasonic + IR + LDR) Motor control Autonomous robot behavior Multi-mode…
NATO APP6 symbols obstacles You have a full range of symbols that can receive 5x2mm magnets on their back to stick to ferrous surfaces. Comes with in 3 different sizes (2 biggests in the map photo) Be careful to glue the magnets with the…
This file is used for creating holes in your project or even creating a circuit diagram in your project
My daughter wanted a hobby horse obstacle. I made one from wooden 15mm diameter poles and some 3d printed connectors. The stick holders can slide up and down so the height is adjustable. Hadware needed: 15 mm pole - any other size will…
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
Scaled and reinforced Robot Mower Obstacle. Printed with PETG with settings: Height range modifier: 0-78mm 0.28 layer height 2 walls Infill 10% Rest of print 0.12 layer height 10 walls Gyroid infill 100% Without height range modifier…
Horse Jumping Obstacle for Schleich stackable Pferdespring-Hindernis für Schleich stapelbar reverse engineered from original part
You need: 8x 20mm M3 screws 4x part1.STL 4x part2.STL 2x part3.STL 2x part4.STL 2x part5.STL or part5_short_version.STL 4x support.STL (needs to be glued on) Glue
Create your own test of skill for indoor quadcopter flying. Print the parts for popular obstacles like knock down targets, the "hand of time", and various gates ... including the dreaded "mail slot" challenge. Our little group gets…
Website about this thing: http://csopevneni.xf.cz/Vybava/Rozsochace/Kotrmelce.htm Steel tank obstacle in 1/16 scale. Need to use supports for proper print. Original format ones shoulder is 1800mm.
DIY – Obstacle Avoiding Robot This 3D printed robot is controlled by an arduino, programmed to avoid obstacle using an ultrasonic sensor https://youtu.be/eR283xyLk98 List of parts: Servo MG90S - http://s.click.aliexpress.com/e/_dSTUmGQ…
This is an obstacle I designed for fingerboarding, which are miniature toy skateboards.
Die Playmobil Reitplatzhindernisse von meiner Tochter hatten mich bei dem Anblick der noch vorhandenen Strohhalme inspiriert hier eigene zu drucken. Ich habe Strohhalme mit einem Durchmesser von 8mm (Papier) genommen und diese auf eine…
Das ist noch die Ergänzung zu den Reitplatz Hindernissen von https://www.thingiverse.com/thing:5215307 mit einem Wassergraben. Dieser besteht aus einer Grundplatte und dem Wasser. This is still the addition to the riding arena obstacles…
This is a remix from kingCondorDanko's model of a skate obstacle. I detached the rail from the ramp, so that you can print them seperately.
Small pet food bowl for my cat with some obstacles to slow down feeding. Works with kibble and wet food, forces your pet to slow down and lick around the obstacles for their food.
This is a case I designed for IR Obstacle Sensors compatible with Arduinos and ESP32s. Specifically this was made to be used in a soon to be completed Escape Room. The module I used is…
ShadowJak's version on Thingiverse had a very small gap between base and model, which showed as errors in some slicers. For this remix I fixed that by moving the model down to the base.
Crawler Obstacle #1: Simple mountain. Exactly as it sounds - a typical mountain climb for an RC crawler. Scaled to fit exactly on a MK3 print bed, and width right for an SCX24 or TRX4M. I printed with PLA, turned fuzzy texture on to help…
RC Crawler Obstacle #5 - the Chevron Bounce. Designed with the Monster Truck chevron pattern in mind, and trying to really upset the suspension of the crawler. I printed with PLA and turned fuzzy skin on to help with traction. You can see…
RC Crawler Obstacle #2: Complex mountain. Made from some simple geometric shapes, this obstacle really can be challenging! Designed to fit directly on the MK3 print bed, and fit the track width of an Axial SCX24 or Traxxas TRX-4M.…
RC Crawler Obstacle #3: Flex Twist. An obstacle designed to test the flex and twist of your Axial SCX24 or Traxxas TRX4M! As created, it will just fit on a MK3 printbed. Printed in PLA with fuzzy skin to help with traction. You can see it…
RC crawler obstacle for your Axial SCX24 or Traxxas TRX-4M! Designed to fit just on a print bed for a MK3s. Wide enough for both an Axial SCX24 and a Traxxas TRX-4M. I printed this in PETG (but PLA works as well) using fuzzy skin to help…
My 7 year old son just started to drive an RC car so I made those cones to achieve some driving skills, turning, 8s, etc… Easy print, I didn’t do it but you can slice it with some material changes to put a white stripe in the middle.…
I remixed it to include a void in the middle, to save some time and filament when printing. I also fixed a missing layer under the main arch that would cause the print to fail. I would strongly recommend not to print the original without…
My daughter wanted her Schleich horses to have more fun - so I came up with those simple jumping obstacles. Made with FreeCAD, the poles are available in both single and dual extrusion variants. The crosses print without supports laying…
Hi everyone! Here is a REMIX from the original Xoxu file: https://www.thingiverse.com/thing:1582398 You cand find all the codes, bill of materials and wiring on my GitHub:…
This fingerboard obstacle is inspired by the iconic stairs of the Philadelphia Museum of Art, also known as the "Rocky Steps." Its sleek design and textured surface offer a unique challenge for fingerboarders. the perfect obstacle for…
print without supports in the right colors little painting needed the piranha plant is jointed so it can pose like the ones in the movie there are some files not in the photos being brick blocks, spikes, and the pirhana plant which is the…
Printed components to build an obstacle. Paper towel rolls will suffice for the rest. The connectors are designed in two sizes: 42 and 44mm inner diameter of the roll. The whole thing is quite stable and allows any height adjustment. Each…
skate park compilation by rafster300 on Thingiverse: https://www.thingiverse.com/thing:4794263
Hier ein Hindernis und zusätzliche Zaunteile für Spiele mit Schleich Modell Pferden. Hinweis: Ich habe mittlerweile etliche der Gatterteile gedruckt. Bei Verwendung von PLA brechen die Verbinder viel schneller als wenn PETG verwendet…
This object has been designed in order to be simply printed and used for your dioramas or to create lots of realistic cement obstacles using the mold by strain cement inside of it. The mold is made up of two parts: you have to join them…
Created these holders to create small obstacle courses for my corgi due to dysplasia and vet suggested he can train his legs muscles this way. To build you need 2 of these and a broomstick of around 22mm diameter. Placed on different…
Frosthaven includes 9x “Power Conduit” obstacle tokens, this miniature is intended to substitute for the cardboard token. I didn't find one available for download so designed my own. I print this in PLA with a 0.12mm layer height.…
Clik this link: https://www.thingiverse.com/thing:1183157 and choose whatever mario bros obstacle or character you want. Then you download my file which you will use as the knob to connect the Mario prints. Slice (IMPORTANT: you will have…
small mount for sensor Category: 3D Printing
This is barrier mold for fingerboarding. Doing it yourself is better option than buying it from internet for like 20$. My settings and material: PETG 15% infill 0,20mm layer height 3 wall loops To hold 2 parts of mold i used clamp 1 or 2…
I wanted to improve on the classic nerf “mobstacle” design from Nerfhaven which used PVC and tarps to create inexpensive, lightweight cover for use in tagging-sport (nerf, airsoft, paintball, etc) field design. I also wanted to create a…
Press fits together and stays put if you have a well calibrated printer. Printed with PLA at .2mm and works great.
ill be adding more obstacles files daily. heres just the begining.
Printed with 2 color changes, the daughters don't mind the different colors on the outside of the frame. Printed with DasFilament's Royal Blue and Infinity Blue and Extrudr's Chocolate Brown for the top. Water texture borrowed from…
This is my first attempt at making a fingerboard spot, I combined a lot of my favorite aspects of skating into one small piece. Any constructive criticism and tips are more than welcome. The ledge has been angled on one side to allow for…
This obstacle course is intended to be used with the 3D Printed RC SkidSteer V3.0. The boundaries are universal links that can be used to make your course outline. The obstacles can be added in whatever order you prefer. The clip system…
Print two bases, at least four sides and six poles. Or use the provided 3mf files. The tolerances are very tight, but some glue may be necessary to make it stiffer. I used this glue: https://amzn.to/4aoDkRE
Simple print to test the sidehill of your mini rc crawler! Print a few of these and put them together in different orientations. Each way creates a new path and challenge. I printed in PLA.
The Wave! This one is challenging - you better have good tires and good weight distribution. The “waves” are spaced right about the wheelbase of the smaller crawlers. Your truck will have to pull up both front and rear tires. Printed in…
Boxes - it looks simple - but you better go through it just right! Get it wrong, and your axle will get hung on them! Inspired by the flood of Amazon boxes that happen in my house… Printed in PLA Check out my other obstacles as well!…
Inspired by my son - after he took my “wave” crawler obstacle and turned it upside down! Seriously! A simple print - that when turned upside down becomes a simple teeter-toter or balance-bridge for your rc truck. Can you get it to…
My robot mower often got stuck on a rock in my garden. I made this obstacle to prevent this - it works for me. Category: Outdoor & Garden
