Multi-box Fingerboard Obstacle V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fingerboard spot with a sizable quarter pipe and ledge, held together by a rail, hollowed to allow for adding weight.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 524
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my first attempt at making a fingerboard spot, I combined a lot of my favorite aspects of skating into one small piece. Any constructive criticism and tips are more than welcome. The ledge has been angled on one side to allow for wallies and other tricks. If the pegs do not properly fit, I recommend trimming them and reinserting with super glue for a stronger bond.
The hole beneath the rail can be filled with small weights like batteries to weigh down the obstacle for fingerboarding.
The rail will fit snugly into the main box without the need for super glue or other adhesive.
Pegs - (see italics)
Rail - Print on its side (I recommend a brim due to the long legs)
Ledge - Print on its side
Multi-Box Base - Print positioned upright
Quarter Pipe - Print positioned upright.