Pressure Advance Tuning Tower with Height Marks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is modified from the pa tuning tower from klipper doc , added a height mark for easier use.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 293
- Wydruki
- 1
- Wyświetlenia
- 821
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
This is modified from the pa tuning tower from klipper doc , added a height mark for easier use.
(https://www.klipper3d.org/Pressure_Advance.html)
How to use:
Prepare for the test by issuing the following G-Code command:
SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=1 ACCEL=500This command makes the nozzle travel slower through corners to emphasize the effects of extruder pressure.
Then for printers with a direct drive extruder run the command:
TUNING_TOWER COMMAND=SET_PRESSURE_ADVANCE PARAMETER=ADVANCE START=0 FACTOR=.005For long bowden extruders use:
TUNING_TOWER COMMAND=SET_PRESSURE_ADVANCE PARAMETER=ADVANCE START=0 FACTOR=.020Inspect the print and then use the height mark on the model to find the height that has the best quality corners. When in doubt, prefer a lower height.