1 / 1
Sim Racing - MOMO (70mm PCD) to Nardi (74mm PCD) Steering Wheel Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts a 70mm PCD steering wheel to fit a Nardi (74mm PCD) steering wheel.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 949
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
Simple adapter to fit a Nardi wheel onto a Simucube/OSW/etc standard 70mm PCD base.
Requires 6xM5 heated inserts to be fitted into the Nardi (non-recessed) holes. I used these heated inserts, M5x6x7OD size, but have also included the STEP file to make it easier to adapt the sizes if necessary.
Shouldn't need supports. I printed in PETG with 5 walls and 60% infill and it's been solid. Zero wiggles, wobbles, creaks or cracks. YMMV, but here it is anyway.